News

Anyone destroyed a 2018 front diff? (Like the earlier diffs broke/exploded)

I searched but couldn't find anything.

Thanks!

My2014 sportsman 570 cvt belt is slapping the top of the inner and outer cover .it slaps around when letting off the throttle and the primary opens.does ayone know what might be causing this?

Hello,
Going through a water hole today I got water in my belt housing on my 2017 Outlander 450, the only odd thing is that I was only around three quarters over the tires in water, and when I drained the belt housing it was completely full to the top with Water, and I think there might be some kind of leak in the intake line since that was the only thing really under water to a big extreme.



I am not really very handy with bikes and such, so I am wondering if anyone knows what the problem might be. I only get the bike serviced at the dealer and I have been in deeper water than this first when I got the bike back in November 2017. Wondering if it was also possible that the people at my dealer never put some kind of seal or something on wrong, since they also forgot to screw one of the plastics on the last time I had it in for service.



Thank you.

i bought a 2002 90 for my grandson, its in great shape and runs great, The chain started coming off and I found a bolt missing. I have been trying to find a diagram that shows the bolt but haven't had any luck. Its hard to explain but it is one of four bolts that hold the rear axle to the frame. Can anybody help?

Hey guys this is my first post kinda new to this so ill get right to it. I have a 2006 polaris predator 500 in great condition anyhow it started well ran well then half hour later tried to start it again started hard then started the got to the place I was going and it died so then 15 mins tried to start it again didn't want to start but then it did got about 200 yards and died again tried to start it again and it wouldn't start again so thend next day got it to start and run with the choke on but as soon as I turned the choke off it died or if I hit the throttle it died to so I took the air filter of and there was about 2in of oil in the airbox and the filter was soaked so I cleaned the card and it was clean in there but still won't start unless choke is on the whole time . any help is appreciated thanks.

So I have about a 3 week old 2018 outlander XXC. I want to put a winch on it and a sunburst yellow XTP front bumper...what's the going rate on the stock aluminum prerunner bumper if I was to sell it? No damage just a few light Mark's from some branches.

Turn key on got power to display but it shows an e on the range deal and push start button and nothing happens ? Any ideas

I just bought/ordered my first two new Can Am ATV,s. 2019 850 XT-P and 850 XT Max. We switched from another make we have had many problems with. Can't wait to get the new machines.
Jim

Is anyone with 570's having problems with the rad plugging and overheating. Mine is a 2017.

I can not keep the rad clean, which is leading to the bike going into Limp Mode.

I am not mudding or bogging, simply trail riding, crossing small water holes, etc. Rad starts clean finishes dirty.

Only 800kms on the bike, first got hot on May long on a family ride, slow ride at 30kph or less.

Rad was cleaned and fan was changed under warranty, today bike gets hot again 2.5 hrs into a trail ride, again Rad looks plugged, I can hear the fan run.

The 570s don't come with factory radiator side shrouds like the rest of the models do and the front grill opening is pretty open (Fair size Open space just above the Winch)

Thanks

Whats up all, Im new to the Can-Am world and I absolutely love my Renegade.
I recently purchased a 14 Renegade 800, hauls ass, anyway My dash cluster just started acting up.. I don't have a clue what its indicating.
When I first fire up machine, get the greeting message (which id also like to change) then the maint req. message.
But then it scrolls backwards Capital R's... after a minute or two it will scroll "New ECU recognized cluster will reset now"
then the screen will go blank. backlight is still on and Hi beam indicator still works, but that's it. No fuel gauge, RPM, speed, gear,4x4 ... machine runs fine, just no dash info.
Also had some engine oil in air box beyond the air filter. Checked blow by through crankcase vent. it doesn't seem bad at all.
Not burning oil, no lack of power. Is this an indicator that it was rolled?


Any help or info would greatly be appreciated
THANKS!