Author: Forum News

Hey all!

My 500 turns over like a bear! I did the top and bottom of he motor a while ago and it's always kinda pulled over hard. The starter doesn't have the balls to turn it over, one or two pulls ( which could rip your arm off) and it fires up and runs great. Can I take the compression release valve out with worrying about the little ball on cam shaft falling ?

What torque does a 2018 renegade 1000 XMR exhaust stud need, Also do i need any blue locktite on it ? Thank you

Heyy out there. I'm new here and in desperate need of assistance with my sons 2006 predator 50cc. I went to change the gearbox oil and I noticed through the sight window that it's all pink. Can I drain it and start over with fresh fluid any help with this issue is appreciated.

does anyone know what this junction valve is? left side of machine, in the picture the two hoses to the left are fine. i need the hose to the far right that still has the factory clamp on it. not a great picture, sorry. hose must be seeping oil, it goes from here up to a white plastic valve that looks almost like an inline fuel filter but isn't. need to get one, no idea what to call it. it was probably a molded hose and is now too rubbery from being oil soaked.thanks for any help. i circled the hose i need, can get better pic if need be.

Attached Thumbnails

 

does anyone know what this junction valve is? left side of machine, in the picture the two hoses to the left are fine. i need the hose to the far right that still has the factory clamp on it. not a great picture, sorry. hose must be seeping oil, it goes from here up to a white plastic valve that looks almost like an inline fuel filter but isn't. need to get one, no idea what to call it. it was probably a molded hose and is now too rubbery from being oil soaked.thanks for any help. i circled the hose i need, can get better pic if need be.

Attached Thumbnails

 

1999 300 Polaris xpress, air cooled.hard to start.will almost drain battery,but when it does start it runs fine.had carb to 2 different shops and was rebuilt.thinking of using starting fluid to get it starter instead of draining battery so bad.thanks any ideals thanks freinds

My blue backlight on my sportsman display stopped working this weekend. I was able to switch over to red, but now I need to fix the blue backlight. Searches of this forum are not returning much helpful info, as almost all of the threads deal with the entire speedo pod not working in some way.

I assume, because the speedo pod works just fine, that this is just the blue bulb/diode that gave up and not a fuse or wire issue. Any advice or direction from the crew on this?

Thanks as always for the help, over the years you all have saved my bacon a few times. Hoping this is another one of those times!!

My blue backlight on my sportsman display stopped working this weekend. I was able to switch over to red, but now I need to fix the blue backlight. Searches of this forum are not returning much helpful info, as almost all of the threads deal with the entire speedo pod not working in some way.

I assume, because the speedo pod works just fine, that this is just the blue bulb/diode that gave up and not a fuse or wire issue. Any advice or direction from the crew on this?

Thanks as always for the help, over the years you all have saved my bacon a few times. Hoping this is another one of those times!!

Has anyone changed out there primary clutch and went to CV Tech? Just looking for some opinions.

Has anyone changed out there primary clutch and went to CV Tech? Just looking for some opinions.