As the title says I'm looking for a front rack and stock exhaust. Just bought my scrambler and didn't have a front rack and i'm way too old for the loud exhaust that came on it.
Maxxis Bighorn Tires for ATVs and UTVs
Maxxis Bighorn Tires for ATVs and UTVsEver wonder why so many machines come standard with these tires more
Maxxis Bighorn Tires for ATVs and UTVs
Maxxis Bighorn Tires for ATVs and UTVsEver wonder why so many machines come standard with these tires more
Tire size
I’ve got a 96 500 sportsman with
25x8-12
25x12.5-10
Can I put 24 x 8 X 12 and 24 x 12 x 10 without causing issues?
Sent from my iPhone using Tapatalk
25x8-12
25x12.5-10
Can I put 24 x 8 X 12 and 24 x 12 x 10 without causing issues?
Sent from my iPhone using Tapatalk
Drain plug threds stripped
Not the drain plug but the drain plug hole on my outlander 570 got stripped i didint think i even tighened it that hard but i pulled the drain plug back out because it felt like it never got tight and there was the threads to my drainplug hole so how do i fix this is there a fix i imagin anything to fix this is going to be a real pain
Easy wire connections
Here's a new product I ran across that some of you guys might be interested in.
https://www.facebook.com/18730644874...08100004/?t=31
https://www.facebook.com/18730644874...08100004/?t=31
Intermittent issues with 2008 700X2
Having intermittent issues with 2008 700X2. Machine runs fine 90% of the time . Machine starts fine but will only run about 5 MPH. Stop, turn it off and restart and its fine . Replaced fuel pump last fall , that wasn't the issue . Any suggestions ?????? Thanks
2006 Sportsman 500 EFI wont start
I'm looking for help with my Sportsman... She won't start. I drove it the other day, then quit. Here is what I did.
It was acting like it was starving for fuel, so I checked to see if the in-tank pump was working, and I didnt hear it prime.
I checked the 3 pin plug fuel pump plug on the ECU side for voltage and A-C pins showed 9.8V. Good (Shop manual says it needs 7-12V.)
Checked the pump for continuity. It was good too.
Thought the pump had a flat spot then, so I replaced the pump.
Still won't start. So I checked the ECU for codes, 41, 22, and 45. Not serious codes.
On a hunch, I checked the power on the fuel side of the 3 pin plug and it showed 0V across pins A-C
I unplug the plug and check it again on the ECU side, It shows 9.8V.... but when I plug the pump in, it goes to 0V.
So, I manually power the pump using a good battery, and it spins to life, and it will fire right up.
I plugged it into the harness and it stalls out. It still wont run when plugged into the wiring harness.
Is it the ECU? Power control module? Are the codes more serious than I think?
Help.
It was acting like it was starving for fuel, so I checked to see if the in-tank pump was working, and I didnt hear it prime.
I checked the 3 pin plug fuel pump plug on the ECU side for voltage and A-C pins showed 9.8V. Good (Shop manual says it needs 7-12V.)
Checked the pump for continuity. It was good too.
Thought the pump had a flat spot then, so I replaced the pump.
Still won't start. So I checked the ECU for codes, 41, 22, and 45. Not serious codes.
On a hunch, I checked the power on the fuel side of the 3 pin plug and it showed 0V across pins A-C
I unplug the plug and check it again on the ECU side, It shows 9.8V.... but when I plug the pump in, it goes to 0V.
So, I manually power the pump using a good battery, and it spins to life, and it will fire right up.
I plugged it into the harness and it stalls out. It still wont run when plugged into the wiring harness.
Is it the ECU? Power control module? Are the codes more serious than I think?
Help.
new here
hey everyone I'm new here and have a 2006 sportsman 500ho efi browning edition looking forward to sharing this forum with you all
newbie
Greetings from a new atv owner...Polaris 2011 Sportsman...Im looking forward to learning about this new to me world...Thank you.