I need to replace my stock wheels (and tires as well). My problem is that I cannot go any wider at this time as my trailer is only 48" wide.
I could go with factory replacement (steel or cast) - but that's a rather pricey way too go for what you get. Note the cast wheel as the same as they used on 2009-2014 RZR I believe (Front p/n 1521106, Rear p/n 1521161).
I cannot locate any wheels with the factory offset (front 4+2, rear 6+2).
I have searched the forum but can't find anything that will point me to wheels that will keep my rear at factory width.
Suggestions?
Possibly some of the best weather to ever grace the Unadilla MX facility greeted the ATV Motocross Championship (ATVMX) presented by CST Tires, an AMA National Championship, as round 8 took place this past weekend. Plenty of sunshine and below average temperatures were a welcome treat to the NYCM Insurance ATVMX National as racing got underway on the legendary dirt that makes up the motocross track, which holds so much racing history.
2015 Polaris Sportsman 570
-1,100 miles. 129 hours, front brush guard, hand guards, mirrors, heated hand grips and thumb throttle, led light bar, led headlights, Polaris rear box, rear Polaris “tough rack, next to new 8 ply Kenda tires, 2500lb Polaris winch, 60in warn snowplow. Rear Work lights. In very good condition, runs and rides great. Only selling due to purchasing a side by side so no longer needed. Original owner. Asking $4,900 OBO 570-401-9298
Ok unsure how this site works just put this on just pissed me off too. But I need all the help I can get PLEASE!!! SUMMER is play time for me and my two kids when they r not with there dad.
Ok I have a black box that goes below my starter selonid has 2 wires coming out the back one goes to a ground nut other one unsure if goes to starter selonid or battery. My push button starter works when it wants 2 so was using a screw driver on selonid to start it. Well this time it burned a few wires and I can't find this part anywhere and trust me I have looked also my bombadier has a Warn wench, if that matters. I may be a female but I'm good well ok with fixing thing tkx 2 internet and u tube. Anyways I need help please. Attached pic of mystery black box pain in my ass
Ok I have a black box that goes below my starter selonid has 2 wires coming out the back one goes to a ground nut other one unsure if goes to starter selonid or battery. My push button starter works when it wants 2 so was using a screw driver on selonid to start it. Well this time it burned a few wires and I can't find this part anywhere and trust me I have looked also my bombadier has a Warn wench, if that matters. I may be a female but I'm good well ok with fixing thing tkx 2 internet and u tube. Anyways I need help please. Attached pic of mystery black box pain in my ass
I know this topic has been covered multiple times, but I am thinking about getting this
light bar for my 2008 Sportsman. However I have noticed that most people use smaller LED bars on their machines, but I don't get that why not GO BIG???:feedback:
I’m looking for a replacement muffler for my 2017 Sportsman 850.
Something quieter with a deeper sound without the raspy sharpness of the OEM.
Any suggestions?
Thanks
MHB
Is there any difference between the 2017 and 2018 sportsman 570 clutches?
Is there any difference between the 2017 and 2018 sportsman 570 clutches?
Hello there I am a first timer in Polaris world and have picked up a 2014 sportsman 400 HO. The story behind it was a farmer had gotten it for his kids to ride who hadn't taken too much care of it and ended up totally ruining the LH rear inner CV and the RH front outer CV. With this in mind I took it in some mud to test it out and the most I could get was the one good rear wheel to spin. I checked out quite a few videos to see how everything worked then got out the tools and checked the resistance to the Hilliard clutch coil (22ohms) the voltage to the plug (12v) and then took it back for another test and with the rear wheel spinning uselessly and the input shaft into the front diff turning it still did not turn the front wheels. My question is does anyone know where the ground of the coil runs back to (wondering if I have voltage to the coil but not a ground ) and question 2 there is another 2 wires to the awd switch that are black but have no voltage to them and no contact in the switch mechanism to connect them does anyone know what they're for.
One final question while I had it up on the the jack I turned the left wheel but that didn't turn the right wheel at the same time should it have done so or does that point to a broken cage ?
