Posted on

98 Sportsman 500 accelerating issues

Hey everyone i have a 98 sportmans 500 and it seems to not want to accelerate past what would be first gear. It does not bog down at idle or under a load. I can tell a difference in the high and low gear so i know im in high. But when i push the accelerator it will pick up speed just fine then basically start ro rev out. Any help would be greatly appreciated.
Posted on

Joel Hetrick Takes the Win and Points Lead in Illinois

The stage was set this past Saturday at Sunset Ridge MX as round six of the 2018 ATV Motocross Championship (ATVMX) presented by CST Tires, an AMA National Championship, series fired off the gate with high temperatures and humidity that were almost unbearable.
Posted on

Need some help!

I have a 2003 Polaris 600 twin, started pouring out of gas with a Little oil mixed out through the air filter box. I thought there was something wrong with my carburetor so I replaced it and it still has the same problem. Can anyone give me some insight on what the problem could be?
Posted on

Gen 1 800 cams

Anyone have information on needing to install low valve seals with griffin performance gen 2 cams? I have contacted him and he said it’s ( a precaution ). Pretty much said since my renegade is an 09 model the casting has more room. I’m assuming that’s for the cam tunnel it self for clearance. Also told me that lots of guys he knows run these cams without the short valve seals with no issues. First major mods to the bike so I wanna get some feedback if I can. Any thoughts?