I just replaced the carburetor and the atv starts and idles fine, but once you push the gas it bogs and stalls. If I open the choke about 1/4 it will run and drive fine. It's got fresh lines, filters and gas. What could be the issue....I know the gas gauge parts broke and fell inside the tank but that shouldn't matter should it? Any suggestions what to do next I was going to pull the tank, dump and clean it out as my next resort????
Rear Diff/ Trans Oil
Just purchased an 18 base 570 and would like to change all the fluids. Is the Trans fluid separate from the Rear diff. fluid? Apologies if this is probably a silly question but I am new to this. Thanks
stripped splines on front differential
hi, I just bought a 2012 sportsman 550 XP EPS. Noticed the front wheels wouldn't engage and found the axles very loose and I could almost pull them out of the differential. Took it apart and found that the axle splines look in good shape but the splines in the front differential are almost smooth. Anybody know if this is repairable, are just the outer spline housings available or does it have to be the whole hub rebuild kit they sell for the front diff?
Does the differential have to come out to do it, or on the side with all the bolts, do all the parts slide out of the differential? Mine has EPS so it looks like a major pain to take it out of the quad.
Does the differential have to come out to do it, or on the side with all the bolts, do all the parts slide out of the differential? Mine has EPS so it looks like a major pain to take it out of the quad.
Atv storage cover
Looking for a cover for my 2017 outlander 650 XT as it will be stored outside all summer. I have a rear box/seat on the rear rack as well.
Any suggestions
Sent from my iPhone using Tapatalk
Any suggestions
Sent from my iPhone using Tapatalk
Loctitie Brake Calipers?
Noticed after a partial ride Saturday, that either I forgot to put a rear brake caliper bolt back in after changing the brake pads or it fell out. My question is: do you use loctite on the brake caliper bolts?
The RIDE Underground MX + Video
The RIDE Underground MX + VideoThe fastest ATV motocross racers in the North America headed west recently for round 3 of the ATV Motocross Racing series. Underground MX is known for having some of the biggest jumps of any track on the series and these guys definitely aren’t afraid to hang it all out there. Check out the highlights from round […] more
g2l push pin size
Hi all bought new 2018 570 and curious if push pins are still 15X20X8mm --
pulled out the crusty digital caliper and damn battery is dead
Thanks in advance for any feedback
pulled out the crusty digital caliper and damn battery is dead
Thanks in advance for any feedback
This is How Jolene Van Vugt Takes Delivery of Her New Polaris RZR Turbo S + Video
This is How Jolene Van Vugt Takes Delivery of Her New Polaris RZR Turbo S + VideoWhen the delivery guy showed up at the home of Nitro Circus star Jolene Van Vugt and realized he forgot to bring his unloading ramps, Jolene was happy to lend a hand. This is how you unload a new Polaris RZR Turbo S, Nitro Circus style. A post shared by Jolene Van Vugt (@jolenevanvugt) on […] more
Need help identifying an issue on gen 1 outlander 800
2007 Gen 1 outlander 800
I recently fell off in some water and tipped her over and drowned her out. Got the motor flushed out and motor seems okay. Not smoking. My issue is the bike seems to have no power. Takes half throttle just to move and it barely moves at all. I drained belt box and also tried disconnecting the battery to reset the computer like you can do on a brute. Still acting up. What am I missing? Need some help identifying the problem and solution so i can get the bike back out there. I'm new to can ams so I'd appreciate any help i can get. Thanks.
I recently fell off in some water and tipped her over and drowned her out. Got the motor flushed out and motor seems okay. Not smoking. My issue is the bike seems to have no power. Takes half throttle just to move and it barely moves at all. I drained belt box and also tried disconnecting the battery to reset the computer like you can do on a brute. Still acting up. What am I missing? Need some help identifying the problem and solution so i can get the bike back out there. I'm new to can ams so I'd appreciate any help i can get. Thanks.
Need help identifying a problem with a gen 1 outlander 800
I recently fell off in some water and tipped her over and drowned her out. Got the motor flushed out and motor seems okay. Not smoking. My issue is the bike seems to have no power. Takes half throttle just to move and it barely moves at all. I drained belt box and also tried disconnecting the battery to reset the computer like you can do on a brute. Still acting up. What am I missing? Need some help identifying the problem and solution so i can get the bike back out there. I'm new to can ams so I'd appreciate any help i can get. Thanks.