What an ordeal. We had the swing arm break in and area that holds on the bearing carrier. We spent a few days off and on trying to get one of the nuts off that holds on the hubs for either the sprocket or the brake rotor. We finally gave up and took the rear axle assembly to a machine shop.
They did get the nut off on the side for the sprocket (took off part of the threads off the axle in the process as they appear to have been frozen to the nut), but then they had to cut the sprocket hub off as it wouldn’t slip off the splines. They did say they had one side of the sprocket hub red hot with a torch, and that didn’t help. They put a couple notches in the axle and ruined the bearings, but I can fix the bearings. The problem is that I can’t find a used sprocket hub that isn’t new. I really don’t want to pay $80 for a new sprocket hub.
Any ideas? Any other models that may fit? Thanks
I have a 1999 scrambler that I put a new cam in. The Exhaust lobe was almost completely gone on the old cam making it run really bad and back fire through the carb. So I got all the timing marks Lined up and pulled the old cam put the new cam and rocker assembly in adjusted the valve to .006. Put it all back together. And now it won’t run. Changed spark plug and checked it for spark. It’s getting gas. And if I pull the plug and turn it over a few times and put the plug back in it will pop over once and the it will just turn over and not fire. If I choke it or hit the throttle it will stall out the starter Immediately. Any help would be greatly appreciated thank you
Does anyone have any ideas regarding carrying a small outboard on a 570, other than securing it to front or rear racks. I have an old 14ft alumunium boat that I leave in @ certain hard to reach small lakes where I fish trout. When I want to go for a quick or late fish all I have to take on the quad is the motor, fuel and fishing rod. I was thinking about possibly using the rear trailer hitch in some way. Any ideas would be appreciated.
Round four, FMF Steele Creek, of the 2018 AMSOIL Grand National Cross Country (GNCC) Series, an AMA National Championship, took place Saturday, April 7 in Morganton, North Carolina. The Steele Creek GNCC is a track that is well known to turn your race plans upside down, and this year’s race would prove to be just another one in the long list of historic finishes that pad the reputation.
Here is a video of installing the Go Deep Snorkel kit.
Sent from my Pixel XL using Tapatalk
Got two kids in middle school. Not much available these days for proper fitment. Got a Polaris sportsman 90 and a grizzly 125 as of now. Older son looks like a gorilla riding a football on the 125 and the sportsman 90 has the worst brakes in the world. Honda's 250 seems like the right size but the transmission is dated and who wants to shift gears these days. I might just try a Kymco product. The 270 is the same bike as the Kawasaki 300 and the artic cat, just different fenders, but a cheaper price. Anyone got any experience with these?
Got two kids in middle school. Not much available these days for proper fitment. Got a Polaris sportsman 90 and a grizzly 125 as of now. Older son looks like a gorilla riding a football on the 125 and the sportsman 90 has the worst brakes in the world. Honda's 250 seems like the right size but the transmission is dated and who wants to shift gears these days. I might just try a Kymco product. The 270 is the same bike as the Kawasaki 300 and the artic cat, just different fenders, but a cheaper price. Anyone got any experience with these?
Hi all, im new to the group and polaris. I recently picked up a 95 explorer 400 4x4. Its starts hard unless you use carb spray. With carb spray it fires right up, once its running it idles ok. The main issue is, it sputters bad accelerating and has no power. I replaced the sparkplug and went through carb. Carb was clean. Air screw was at 1 1/2 turns. I tryed turning it out and in and sputter was the same. Any input would be appreciated.
Hey folk, needs some help here, the other day I was adding some accessory light switches on the instrument panel. When I removed housing right behind the instrument panel, right behind the high beam light, I see these 3 hoses jetting up?? Is this normal. I just got my 18 back from the shop and was wondering if they forgot to re-attached these. Please see pix
tia,
Has anyone bought a lava orange atv? If so let's see some pictures of it.
Sent from my SM-N950U using Tapatalk
