Author: Forum News

2016 outlander L 570 xmr. The 4wd will not engage and also the lights and cigarette lighter are not working. Thanks in advance.

Trying to get back into the sport and currently debating between a side by side or two ATVs. It comes down to price.


Basically I am worried the 570 won't be enough for me, my last ATV was a Brute Force 750 which I sold in 2012. It will primarily be a mud machine with 29.5s, do you guys think it'll turn them easily if I changed the clutches. Not a lot of information on these little engines that I can find. I'd much rather have an 850 / 570 for wife but then I'm getting into the pricing of a side by side.


Thanks in advance!


Sent from my iPhone using Tapatalk

Are the low range and high range on the output shaft? Would it be possible to get rid of the gear reduction in just the High range?

I just bought a 2012 650 max xt with a whole 23 miles on it. I brought it home Monday and it ran great, put about 5 miles on it and was very impressed with it. I went to take it out tonight and it is only running about half power, low rpms when wide open and can only max out about 20 mph. It doesn’t idle great, likes to stall but will start right back up. I siphoned all the old gas out and put new gas in, no change. I do t really have much time to work on it and will probably take it in for service, but looking for thoughts. Thinking fuel pump or filter? It’s lived in a climate control garage it’s whole life and has never left the prior owners yard. It looks like it just came out of the crate.

Sportsman & Sportsman XP Rear Box w/seat - Lock and Go System "kit C.? Used for only a handful of times before we ungraded to a side by side. Gentle used condition. Lock and Go System lets you add/remove this box in minutes once installed. See pics for details.

285$ OBO. You pay shipping

Attached Thumbnails

         

So I have an 07 sportsman 500 and the battery isn't charging. When I put the atv in diagnostic mode the volts it's reading is 12 when it's off and 14.3 when it's idling, when I rev it it goes up to about 14.5v. I charged the battery the other day and it crunk up fine with the key start but after riding 30 mins or so I cut it off and tried to start it back... it clicked like a dead battery does so I had to pull start it. After letting it idle and some revving for about 10 min or so the volt are up 12.2. I have no idea where to start, can anyone help, also the my multimeter displays the same voltage as the diagnostic setting does.

Ok so my front on demand drive has stopped working last few weeks just when the rain turned the fields to mush and its badly needed. My quad is old (2006) and when I got it the front track rod ends were all worn as was the wheel bearing. I've replaced all these but noticed the front cv joints were fitting really losely into the front diff, and everything looked a bit worn.
I've topped up the fluid in the diff but it's just dribbling back out overnight with worn seals.
I'm guessing the drive has stopped as the fluid level is not being maintained, but I have to use the quad every day to run hay to the horses.
Would this be a strip down and rebuild with new seals and inner bearings, or is it possible I've chewed up the roller pin cage (which is not cheap).
Btw still have electric current running to the diff so it's not that.
Anyone here done a strip and rebuild of the front on demand diff? Any advice or sticky note on step by step would be great.
Bike is 2006 Hawkeye 300.
Thanks

Long time ski doo rider. Traded in my Suzuki king quad 3 days ago for a defender xt HD 10. What an amazing machine! Mostly used for hunting and working around the house. So far I?ve added the 1/2 windshield, side bed rails, stronghold gear rail, and 2 gun scabbards. Waiting for my bed mounted winch to arrive along with my Rear window with slider. Winch will be nice to hoist deer into the back. About killed myself 2 nights ago trying to load my buck!! Goes in Friday to have my western v plow mounted. Birthday and Xmas coming up, so extra lighting will be added too!

This obviously isn't Polaris related, per se but it came on the polaris I just bought. It has two relays and in troubleshooting why it would run the cable out but not in, I found a relay to be bad. Where do I find such a piece to fit in where this one was? I'd rather not have to require or reconfigure anything. Any advise?

Attached Thumbnails