Author: Forum News

Hello my friends from all over the world...im begining to loose my mind because i dont know what to do...i have 2016 stock limited edition outlander 1000R, the only thing changed is exhaust slipon for yoshi.

My shiftout at Low is around 7200 7250...i also hit rev limiter...

My shiftout on High is waaay to low! Its around 6800 when it should be around 7300-7500 for best peak performance...

I can feel the lack of power and ive burned 1 belt already because of that...it just doesnt get the revs high enough to pull strong...


Im turning to all you atv users...to help me and others out...

Atv was bought new in January...it has 2500 miles trail riden only...

Here is the video in HIGH GEAR

https://youtu.be/d0aHmY5OJwE

Here is the video in LOW GEAR

https://youtu.be/5mJbATrnaVs


Thank you all for helping me solve this problem...

I just got done installing the Heat Demon by Symtec heated hand grips and thumb warmer.

I was able to just removed my stock grips and reinstall after the warmers were installed to the bars. Here isa video I throw together of me installing them.

Below I have attached a photo of my current issue.

I bought a 2010 Sportsman 800 to hold me over until I pick up a new 850 or 1000. It had a lift kit on it (I know, I didn't want this but the deal was right). First thing I did was remove the lift kit and order new bolts the correct length for the rear sway bar (go through top into the links).

As you can see, there is a gap, which would lead me to believe that my sway bar is currently doing nothing.

Anyone see what the issue is? Thanks.

Attached Thumbnails

 

I got a 2001 Polaris Trail Boss 325 and was thinking of putting a 17 inch light bar on it and was wondering if it would be safe on the battery and stator

I put an 09 intake manifold on my 06 to help with power and also order the Twin Air filter for 09+. (the washable one that was dynoed showing 1 less hp than the 09 stock filter) I tried to install it in my 06 airbox but the filter's plastic piece won't fit into the rubber boot that goes through the airbox to the throttle body. So I have 2 questions...

1- will the rubber boot from an 09+ fit in my 06 airbox so I can use the filter in the existing aribox?

2- if not will an 09+ box work with my 06 as far as fitment for the frame bolt holes, throttle body and also clearing the steering stem? (asking this because the 06 airbox lid slightly touches the steering stem when installed and it's a snug fit)

Bought new 2015 250 hrs: All maintenance done properly.
Dead battery, fuel venting down frame, extreme heat on legs and fuel pump is on its way out on 2015 & 2014 touring. I'm done with them. Getting it fixed and selling. Problems with both. They have lost my trust.


Sent from my iPhone using Tapatalk

Bought new 2015 250 hrs: All maintenance done properly.
Dead battery, fuel venting down frame, extreme heat on legs and fuel pump is on its way out on 2015 & 2014 touring. I'm done with them. Getting it fixed and selling. Problems with both. They have lost my trust.


Sent from my iPhone using Tapatalk

hey guys need some help with my 90 predator having some running issues i think it is a fuel problem. I took the carb off to clean it, the carb was really dirty i pulled the main jet out cleaned and float and i tried to get the other jet out and it would not come out is that jet like a mixture screw so when i put it back together i ran that jet all the way down i havent tried screwing back out. and when i got it all back together i cant get it to run but if i take the air box off and hold my hand at just the right way it will take off and run decent and wont idle. let me know what you guys think?

Do You have a favoritt place for ordering parts for you sportsmann who sending to whole world (Norway) please tip me

Touring 850



Sent from my iPad using Tapatalk