I've tried advanced searches and also scanning trough the 3 pages in the mrrpm section but can't find the thread where this setup was dyno'ed and the charts were posted. Anyone happen to know where it is now?
Suspension question for XTP owners
So what is the suspension like with the QS3 shocks on the Outlander XTP? The regular Outlander is too soft without the optional heavy duty springs. The XXC Outlander is too stiff with the Fox RC2s. Is the Outlander XTP "just right" in the middle? How would you describe the ride quality of your XTP on rocky terrain? Plush, vs firm, vs too firm? How much difference do the three adjustment choices make? Thanks.
Pinion bearing gone after 1200 KMs
Hey everyone with a 2017 xmr.
I've got a 650 and noticed while greasing the driveshaft last week that the pinion had some play in it. We took the diff out and opened it up to find that the pinion bearing is definitly gone and the pinion is worn already.
Most of the Kms on the machine are from trail riding and it hasn't been abused when in the mud.
Just a heads up to everyone that the build quality may be going downhill on these machines.
Now I've got to decide what needs to be changed and if i should do it myself.....FML
I've got a 650 and noticed while greasing the driveshaft last week that the pinion had some play in it. We took the diff out and opened it up to find that the pinion bearing is definitly gone and the pinion is worn already.
Most of the Kms on the machine are from trail riding and it hasn't been abused when in the mud.
Just a heads up to everyone that the build quality may be going downhill on these machines.
Now I've got to decide what needs to be changed and if i should do it myself.....FML
How to fix a broken composite rack
In addition to all the other fails on my wheeler (I really got ripped off by the jerk who sold it to me), while disassembling the necessary components to install the new winch, I noticed that there was a crack along the part of the bumper that bolts it to the wheeler. I slowed way down and used caution while I finished taking the bolts out of the plate.. and the piece of composite flange thing just fell onto the ground.
I'm not worried about the bumper falling off.. it's got a winch and a lot of steel to get past before it does, but I don't want to *not* try to patch this up somehow.
What glue would you all recommend? Regular Krazy Glue? Gorilla glue? Elmers? Rubber cement? Spit on it?
Thanks!
I'm not worried about the bumper falling off.. it's got a winch and a lot of steel to get past before it does, but I don't want to *not* try to patch this up somehow.
What glue would you all recommend? Regular Krazy Glue? Gorilla glue? Elmers? Rubber cement? Spit on it?
Thanks!
2 up seat for a 450 HO
Does anyone make a 2 up seat for the Polaris 450 HO or any mod for it?
Just a newbie to ATVs
My name is Leland, I'm 63 and retired from the pulp and paper industry. We had lived in Washington state but decided to pull up stakes, sell everything and move to Puerto Vallarta Mexico. Had a Can Am Spyder 2011 but decided the road conditions here in Mexico were not suitable for that type of bike. However I do miss it. So I sold it and we bought a 2017 Can Am Outlander 1000 Max. They are street legal here and it seems many people ride them. Saves gas on the truck and is easier for the parking spaces.
Glad to be here and hope to learn a few things.
Do have one question though.
What tire pressure do you guys recommend for street use?
Thanks and hope to hear from you.
Glad to be here and hope to learn a few things.
Do have one question though.
What tire pressure do you guys recommend for street use?
Thanks and hope to hear from you.
2018 Polaris RZR XP Turbo EPS Dynamix vs. Can-Am Maverick X3 X RS: By the Numbers
Top Gun Sport UTV Showdown
Ladies and gentlemen, make no mistake. There is a war going on. It is raging between Polaris and Can-Am over who can make the fastest and best handling Sport Side-by-Side. It is a war that Polaris held the high ground on for years, until Can-Am unleashed the X3 lineup. This new entry shook the very foundation of the UTV world.
Earlier this year, Can-Am unveiled the latest versions of the X3s and we all couldn’t help but notice the boosts in horsepower numbers. This added fuel to an already burning fire. How would Polaris respond? Earlier this week, we all found out. How do the premier machines from each company stack up? For now, we can only speculate based on the specifications. Let’s look how the 2018 Polaris RZR XP Turboo EPS Dynamix and Can-Am Maverick X3 X RS Turbo R stack up – by the numbers.
Check out the head to head here: 2018 Polaris RZR XP Turbo EPS Dynamix vs. Can-Am Maverick X3 X RS: By the Numbers - ATV.com
2018 Polaris RZR XP Turbo EPS Dynamix vs. Can-Am Maverick X3 X RS: By the Numbers
Top Gun Sport UTV Showdown
Ladies and gentlemen, make no mistake. There is a war going on. It is raging between Polaris and Can-Am over who can make the fastest and best handling Sport Side-by-Side. It is a war that Polaris held the high ground on for years, until Can-Am unleashed the X3 lineup. This new entry shook the very foundation of the UTV world.
Earlier this year, Can-Am unveiled the latest versions of the X3s and we all couldn’t help but notice the boosts in horsepower numbers. This added fuel to an already burning fire. How would Polaris respond? Earlier this week, we all found out. How do the premier machines from each company stack up? For now, we can only speculate based on the specifications. Let’s look how the 2018 Polaris RZR XP Turboo EPS Dynamix and Can-Am Maverick X3 X RS Turbo R stack up – by the numbers.
Check out the head to head here: 2018 Polaris RZR XP Turbo EPS Dynamix vs. Can-Am Maverick X3 X RS: By the Numbers - ATV.com
Has anyone tryed to fabricate a LinQ rack to the Commander?
Has anyone tryed to fabricate a LinQ rack to the Commander. Im trying to re-use my Canam LinQ rear 3 section soft pack from my Outlander ATV, on my Commander. Tried bungie'ing it down in the cargo bed on the commander but it flops around to much. was hoping to modify a rear LinQ rack from an atv to mount on the rear bed rails of the commander? so has anyone done something similar? i see the Mavrick has the LinQ rack but nothing availablke for the commander.
Show me what youve done.
Thanks,
Eric in CT.
Show me what youve done.
Thanks,
Eric in CT.
Allen Wrenches for ’15 Sportsman XP 1000
2015 Sportsman XP 1000: Trying to determine what allen wrenches it uses so I can purchase sockets for easier use. Called service departments and got inconsistent answers of metric only, Standard only, and a mixture of both. Can anyone tell me:
1. Metric, Standard, or both?
2. Does anyone know what sizes so I can make sure the set I get covers all of them? Saw on a few discussions regarding other models that they used some 'off' sizes that don't come in basic sets I'd like to get a small set, not one that has every size ever created...and if need be, add a few 'off' sizes.
Thanks
1. Metric, Standard, or both?
2. Does anyone know what sizes so I can make sure the set I get covers all of them? Saw on a few discussions regarding other models that they used some 'off' sizes that don't come in basic sets I'd like to get a small set, not one that has every size ever created...and if need be, add a few 'off' sizes.
Thanks