I have a 2016 Outlander 650xt. I noticed that when I put it in reverse without using the accelerator the quad wants to start rolling backwards. Do I have a problem here?
New 17 Sportsman 570
Upgrades on the way.Hope to document here.
Purchased at snows Polaris west.Matthew is on the ball:You_Rock_Emoticon:$4299 +100 fees & tax.
3 locations around PA.
https://snowspolarisatvs.com/Showroom/New-Inventory
Purchased at snows Polaris west.Matthew is on the ball:You_Rock_Emoticon:$4299 +100 fees & tax.
3 locations around PA.
https://snowspolarisatvs.com/Showroom/New-Inventory
Round 10 – RedBud Recap – ATVMX National – 2017
Need to replace lost parts
Anyone know where I can buy the red belt cover/ clutch cover drain plug?
Also need new rubber plugs for the front "dry" box.
Also need new rubber plugs for the front "dry" box.
Sportsman or Outlander?
Hey Guys, looking to buy a new ATV and have narrowed it down to the Polaris Sportsman 570 SP or the Can Am 650 DPS. I know this is a Polaris forum but wanted to hear what you think. I will be using it mostly for hunting and hard trail riding.
Hunting situations will be throwing whole deer or elk quarters on the rear rack, climbing out of deep canyons, driving in snowy conditions, etc.
Trail riding through rocky high desert, windy mountain trails.
Hunting situations will be throwing whole deer or elk quarters on the rear rack, climbing out of deep canyons, driving in snowy conditions, etc.
Trail riding through rocky high desert, windy mountain trails.
2018 Polaris RZR XP Turbo EPS Dynamix Edition Review + Video
2018 Polaris RZR XP Turbo EPS Dynamix Edition Review + VideoIf you have followed the progression of Polaris as a company over the last 10 years, then you know that nothing should surprise you. Yet the 2018 Polaris RZR offerings are indeed surprising. With the advancements coming out of the largest manufacturer in our industry, we were blown away with the direction Polaris is looking […] more
2008 Sportsman 500 fuel pump problem
Alright guys about 2 weeks ago my four wheeler would barely start then I completely went dead so I charged it and it only last for like 30 mins total. The when I charged it again it wouldn't start but the fuel pump would turn on and you could hear it trying to turn over. The next day the fuel pump won't even kick on and text the battery and it is fine. I have checked the fuses and they are all fine, check the starter it is fine, solenoid is fine as well I can't see any broken wires or anything and I'm at a loss. I don't have the money to take it to a dealer so I'm trying to do these on my own any thoughts?
Carb removal
While I'm on here, i have a shop manual (with poor photos) but just curious since talk is cheap.
I need to remove the carburetor from a 95 or 96 Magnum 425 in order to clean it. What's the trick to disconnecting the throttle and starter valve cables from the carburetor? It's a bit different than my Xplorer 300 which goes in from the top (at least the throttle cable).
I *think* the four screws that hold the top cover off the carb need to be removed. Mine are seized so I'm either going to have to either take a pair of small vice grips and unscrew them that way or grind the heads off with a Dremel tool and remove the remains that way. I sprayed them with some PB Blaster.
Once this cover is removed, I'm thinking the throttle cable should slip off a pulley or something since it goes in from the side.
For the starter valve, there is a black cover on the left hand size. If I remove this plate, is that what gains access to the end of the starter valve?
I need to remove the carburetor from a 95 or 96 Magnum 425 in order to clean it. What's the trick to disconnecting the throttle and starter valve cables from the carburetor? It's a bit different than my Xplorer 300 which goes in from the top (at least the throttle cable).
I *think* the four screws that hold the top cover off the carb need to be removed. Mine are seized so I'm either going to have to either take a pair of small vice grips and unscrew them that way or grind the heads off with a Dremel tool and remove the remains that way. I sprayed them with some PB Blaster.
Once this cover is removed, I'm thinking the throttle cable should slip off a pulley or something since it goes in from the side.
For the starter valve, there is a black cover on the left hand size. If I remove this plate, is that what gains access to the end of the starter valve?
Would Razr wheels fit a Magnum 425?
I picked up a second Polaris ATV the other day from a co-worker, a 1995 or 96 Magnum 425. It hasn't ran in years. The side wall on one of the front tires is FUBARed from where it sat flat and won't hold air. I don't think I can put a tube in it.
Normally I don't buy used tires (for cars anyway) but these look like they are in good shape.
https://tricities.craigslist.org/snw...182678838.html
Most of the time people on CL want the same price for used tires as new ones. This seems fair for tires and wheels. They are supposably 1" narrower than what was suppose to come on it from the factory. I'm not sure what's on it right now.
Anybody know if Razr wheels use the same bolt pattern has the Magnum 4/156mm?
Normally I don't buy used tires (for cars anyway) but these look like they are in good shape.
https://tricities.craigslist.org/snw...182678838.html
Most of the time people on CL want the same price for used tires as new ones. This seems fair for tires and wheels. They are supposably 1" narrower than what was suppose to come on it from the factory. I'm not sure what's on it right now.
Anybody know if Razr wheels use the same bolt pattern has the Magnum 4/156mm?
It’s Like a Mud Bog Endurocross + Video
It’s Like a Mud Bog Endurocross + VideoWhen you get bored with just trying to make it a cross a regular old mud hole, mud bog endurocross is sure to liven things up. It’s a rough, wet and wild ride that isn’t for the faint of heart! A post shared by Wallace Gale (@fulloutty_gale) on Jul 15, 2017 at 11:28am PDT more