I know they have engine braking, but read conflicting information. Some sources indicate you need the 570 SP to get the ADC, others say if you have EBS you automatically have ADC....
Need help identifying wheel/tire combo
Help...Hello all, I recently found a pic of a ranger 900xp with a wheel/tire combo I want to put on mine, can anyone tell me who makes them???
3 Belts in 3 months
2012 650 Outlander, As the title states. I have ruined 3 belts in as many months with only 300 km all said and done. I have also had to change the secondary ramp 2 times.
This has me puzzled. Everything I have seen all points towards the secondary clutch with worn bushings. There is play in the 2 sheaves. The clutch system is stock and the bike has almost 20,000 km. Have a look at the belt and ramp pictures and let me know if you think I am on the right track. I have already worked on the primary with new rollers and clutch fingers. I am going to start looking for a used secondary as a new one is over $300.00
This has me puzzled. Everything I have seen all points towards the secondary clutch with worn bushings. There is play in the 2 sheaves. The clutch system is stock and the bike has almost 20,000 km. Have a look at the belt and ramp pictures and let me know if you think I am on the right track. I have already worked on the primary with new rollers and clutch fingers. I am going to start looking for a used secondary as a new one is over $300.00
Bigger tires??
Can you put bigger (wider) tires on the factory stock rims or do you have to upsize the rims too?
New member
Greetings everybody.
Magnum 330 Cylinder head
I got one of these, good head, engine developed a rod knock. Will ship to you for 175.00, incl ship.
04 polaris sportsman 700
No spark . When did the ducati end and kokosan begin ? Mine was built 04/15/03 vin #4xach68a94a027386 any help appreciated. Thanks guys
what primary pullers are needed?
I am confused here...
Cvtch shows a puller, 0155-1066. Is this all I need to remove the stock clutch on a 1000?
Cvtch shows a puller, 0155-1066. Is this all I need to remove the stock clutch on a 1000?
Things that go sprong.
Hi, All. It has been a while since I last posted. I have run into a snag replacing the pistons on my 2012 Ranger 800 crew. I have removed the head and jugs and sent them to the machine shop for inspection or repair. I now have to remove the cir-clips from the wrist pins and am running into a little problem. I guess I have never seen clips that are installed this way. There is nothing to grip onto for removal or installation of these clips. My best guess is to use a pointed awe and a screwdriver for removal but I will still have to install new ones when the time comes. Is there a special tool or is it just mash them in and hope they don't go sprong? (by the way the engine case is still mounted to the machine)
Cluster and Speedo not working.
I have a 2012 sportsman 500 HO. The speedometer and the cluster is not working at all. Everything else works including all headlamps. Any suggestions or help would be greatly appreciated.