Author: Forum News

Looking at either highlifter or EPI lift springs for an upgrade. Just looking to stiffin it up some especially when riding 2up and a little added lift would be nice. Does anyone have any experience with either and which would you suggest? Also, on the high lifter web site it says 2011-2014's need an adapter. Are these really the only models that needs them?

Suggestions on why it does on decelleration from the exhaust?
The last 2 rides. 1st ride was a small pop pop pop sound. 2nd short ride was loud bangs on full throttle to coast.
Last year i replaced the rubber boot from the carb to the engine and that solved it. Been good all year now till just a few days ago. The new boot is still crack free.
plugs arent that old but i found a loose top part of the plug that screws onto the plug....fuel filter is good. Maybe an exhaust donut?
Have been playing in alot of water, but the 2 rides have been on road and dry.
I'll pick up new plugs today.
Machine starts and idles great..lots of power too.

Saggy, leaky, and dirty bags are a thing of the past! (We are choosing not to acknowledge the obvious joke.)

Just 'cuz you are riding in the open, doesn't mean your gear has to! Our Bazooka bags are tough-as-nails sturdy and weatherproof!





Use discount code "Beat the Sun" for 15% off your order through the rest of July!!!



.

Hey guys I got some hd5 beadlocks with 27x11x14 and 27x9x14 tires that I bought a month ago for sale and they have 6 miles on them in brand new condition and they were just to agressive for my liking so I'm selling them for 1000 including shipping I paid 1300 for them and they are 4/156 pattern they fit sportsman atv and sxs etc

Good morning. I need some advice. My 2005 sportsman 400 won't start. I turned the key as to start it and with out the engine turning over I hear a loud bang. It sounded electrical especially since nothing from engine turned. If I pull start it, it will only start once and it will run for a few seconds and die. Then it wont pull start till many hours later and it will do the same, start and not run more than a Second or 2.
What's the possibility it could be the selonoid or related? Any advice would be a great help ty
Steve

I bought an unknown year tb 250 lower on ebay and the inner seal on the old one (98) had a retainer ring with screw holes in the block to hold it on. the new one has no such holes. can anyone one help me figure out the year and or how i can secure it? Picture is of the new lower. Thanks in advance!

Attached Thumbnails

 

Let the voting begin for the June 2017 Polaris ATV of the Month! We will leave the poll open until the end of the month and then announce the winner. We got some really good pics this month, thanks to everyone that participated and GOOD LUCK!!

andwes03



2015 Sportsman 570
QSC Clutch Kit
Kenda Bear Claw HTR's
Viking front brushguard
12 LED light bar
Custom LED flush mount headlights
Heated handgrips and thumb warmer
Polaris Rear Tough Rack
Modified Polaris Lock and Ride rear storage box
2 LED pods mounted to rear rack for reverse lights
2500lb Polaris Winch
Warn Provantage Snow Plow
Cecco racing billet aluminum thumb throttle lever

TheStatelineATV



2009 xp 850 with tons of upgrades

bobx2

2015 Sportsman 570 Touring EPS
26" Kenda Bearclaw HTR's on ITP Delta Steel wheels
Warn XT25
Iron Baltic HDPE Skid Plates

Bshuk57



2015 Scrambler 850.
28" Sedona ripsaws on ITP SS212s
Full Ricochet aluminum skid plates
Custom 3rd headlight
Dry storage box
To-do list includes
RVS reflash
Rick Cecco frame braces
QSC clutch kit

BlueFire570SP



2015 Sportsman 570 SP Touring

1948boat



2003 Polaris Trail Boss
STOCK,
new chain and sprockets
new Polaris belt
new rear break pads
all lubes and filter changed

bp405



05Dirtymax



2005 sportsman 700 EFI twin
26" super swamper vampires
LED bars mounted in factory headlight location

Hi

I have a 2012 sportsman 550 EPS & I'm going to change the rear wheel bearings.

Can anyone tell me how many ft lbs to torque the castle nut too?

I found some you tube videos but they all had different torque specs & none of the videos were for my specific model.

Thanks in advance