Author: Forum News

Look at BRP and Amsoil 5w40 or 0w40?

Can a 250 trail boss trans work on a 325 my transmission is screwed up and grinds if I go too fast or ride rough and we have a transmission off of a 250 and I wasn’t sure if they were interchangeable

Hey could anyone help with tires. Have 30 Cryptids on my xmr and was thinking off installing ITP mud lite 2’s. Is this a good choice? Will they still perform well in mud. Found the Cryptids to be not so good on the trails and hill climbing. Any feed back would be great

Hello all. I just purchased my first quad/headache. It's a 2014 Sportsman 570 with a bad motor. Sooooo I'll be needing guidance, lol. Anyway, stoked to own one and can't wait to get it running. Hope everyone is having a dandy day.

I recently bought a couple calipers spec'd to a 98-02 Sportsman. I am adapting them to an independent project. My question is: why does each caliper have two lines to it. It appears that both lines supply both sides of the caliper and each has its own bleed valve.

I recently ordered a couple hydraulic brake calipers specified for a 98-02 Sportsman. These are for a project (not Polaris) that I am working on, and ordered them based on adaptability. My question is what is the purpose of the two hydraulic lines to each caliper. It appears that each one supplies both sides of the caliper, yet one is slightly smaller than the other. Each one appears to have its own bleed as well.

Thanks.

Hey guys, I'm new to the forum.



I own a 2019 Outlander MAX DPS 570 which I imported to Ecuador, my native country.



I usually go riding with my wife on dirt trails and rocky trails and the average speed we go is about 30MPH.


We like cruising and taking in the nature and even though it's not a deal breaker, the suspension seems a little harsh especially on bumps and potholes.



I moved the suspension setting one place to release a little tension. I am a total noob at this and have no idea of what I'm doing.


Is someone in a similar spot to mine and they just like riding nicely with their wife and have a smooth ride?


Any help would be appreciated!


Thanks in advance and sorry if my English is a little rusty as it is my second language. (attaching some pics for reference with the wife.)

Attached Images

File Type: jpeg	WhatsApp Image 2019-04-08 at 4.31.13 PM.jpeg (153.5 KB)
File Type: jpeg	WhatsApp Image 2019-03-05 at 2.18.24 AM.jpeg (181.6 KB)

I have an 05 Sportsman 90 with a non removable float valve seat in the carb. All the parts look ups show a removable seat with a little clamp and screw holding it in. Anybody know the Polaris part number for the float valve for the non removable seat. They were made by Eton back then so even the Eton number would help.

Hi, I'm new to the forums. I have a 2003 Outlander 400 that was given to me. I had to replace all of the fuel lines as it had been sitting for many years I also cleaned the fuel tank and I cleaned the carb many times and I put a brand new side diagram. The intake boot looks good and I think the fuel pump is good bc it idles and runs good to about 1/2 throttle and then sputters. Its got a brand new air filter too. I can't figure it out. I'm pretty sure it is running lean bc if you give it a little choke it smooths out, and the plug is dry. But all the jets are clean. And the needle moves up and down as it is supposed too.

I have had a bunch of can am atvs 650 Outlander xt I had some problems with them. I went to Sxs and never went back to atvs. I have owned tons of different utvs. Last year I bought a defender hd10 cab. I was excited about the purchase at first. I'm an outfitter guide in Utah. So I use it lots. I don't race it or go fast I just simply use it. In one year I have had nothing but issues. I have put a new clutch in it had the motor rebuild all new wiring harnesses plus tons of other problems. Them are just some of the bigger problems. The motor is acting the same way it did before I took it in, when they rebuilt the motor. Ive put 300 miles on the rebuilt motor. I paid roughly 25k for it. Ive put 6k into it in one year, and was without the machine 3 months in 1 year. Now the motor is going to have to be rebuilt again. I have to say worst purchase I've ever made. I put my trust in can am purchased their product and it's been a nightmare. I have talked to can am they will do nothing! I blame it on air intake and clutch intake. Just look at the placement of both of these. I hope I don't get banned for writing the truth.