Posted on

Plug in front storage box

I'm at work so I can't post a picture, but there is a plug attached to one of the bolt in front of the front storage area right behind the hinge for the lid. I was wondering if anyone knows what it is for. This is in a 19 sportsman 570 eps. Just picked it up a few weeks ago.
Posted on

Can am terra 35 (superwinch)

So I decided on the terra 35 winch but can am has the terra 35 (superwinch) anywhere from $320 to 350 and if you just buy the superwinch terra 35 it’s $220. I know the can am version comes with pre cut wires but is that all you get with it or should I just buy the superwinch version and save some money. Dont really want to spend a extra $100 on pre cut wire and a can am sticker. Hopefully I can hear from people from both sides and figure out if the can am version is worth it
Posted on

Rebuild kits

I have a 2018 Polaris sportsman 850 highlifter edition. I am wondering what rebuild kit will work for it. I’ve noticed quite a lot of rebuild kits but not sure witch one will actually work for this motor. Any advice will help tremendously thank you.
Posted on

Outlander xmr 1000 multiple issurs

Brake lights work but headlights only when they want to. Winch and 4x4 only works when it wants to. New wheel bearing and tight ball joints still has slop in steering.... anyone have these issues
Posted on

Outlander xmr 1000 multiple issurs

Brake lights work but headlights only when they want to. Winch and 4x4 only works when it wants to. New wheel bearing and tight ball joints still has slop in steering.... anyone have these issues
Posted on

Rear End carrier Bearings

Looks like the bearings are shot, I'm hoping the races are okay, probably not and will be replacing them as well.
Now that the engine is running top with my latest carburetor post that everyone on this great site help me out with.
I'm going to start on this venture.
Any pointers please chime in, as usual this is a great site.
TY.

https://youtu.be/rdXJhwI3AZI
Posted on

Tracks

HI any one have tracks on a 1000 outlander whats good and bad what speed you get....i can buy set off 500 will they fit my 2012 1000 will the gearing be ok? thanks in advance
Posted on

Engine Drive Coupler and Trans Coupler

Hello,

I have a 2009 Sportsman 550 XP EPS and the trans coupler nut came loose and took out a trans bearing. I have the trans back together but I can't seem to locate the torque spec for the trans coupler nut? Does anyone know what the torque spec is?

Additionally, this issue makes me wonder if I should take off the engine drive coupler nut and re-torque it to make sure it doesn't come loose.

Also thinking about putting some blue or red locktite on each nut. Anyone have a preference? I'm thinking blue is probably enough but not certain.

Thanks for your time!