See pic below of a rather large shipment of engines we sent out in one day recently. Please give us a call here at nFLOW at 812-402-8282 for all of your engine, transmission and turbocharger needs. www.nflowmotorsports.com
nFLOW Engines
See pic below of a rather large shipment of engines we sent out in one day recently. Please give us a call here at nFLOW at 812-402-8282 for all of your engine, transmission and turbocharger needs. www.nflowmotorsports.com
Arkansas have any good places?
Relatively new to NW Arkansas lookin for areas to ride. Got spoiled in Arizona where u can ride anywhere anytime.
Polaris Ranger/RZR 900 bottom end
See a pic below of a Polaris Ranger/RZR 900 bottom end being assembled here at nFLOW. Give us a call at 812-402-8282 for all of your engine, transmission and turbocharger needs. www.nflowmotorsports.com
2006 polaris sportsman 500ho
Is the clutch puller for polaris quads the same as a clutch puller for polaris snowmobiles I have one for a snowmobile but im not sure if i should try to thread it in and have the possibility of messing something up
Side protection bars
Just wanting to know what people are running for side bars, I can't find much on the net so I was just going to bend some up myself
Anyone else built their own?
Sent from my SM-G930T using Tapatalk
Anyone else built their own?
Sent from my SM-G930T using Tapatalk
BKT TR144 tires
anyone have BKT tires on their 570? thinking about going with ITP 16x7 wheels and bkt tr144 7/16 (29") tires and looking for pics and opinions
pic is of a rzr with similiar specs
pic is of a rzr with similiar specs
RC2 shocks on XMR
I just wanted to put this out there because I searched for days trying to get an answer. I purchased used but new fox RC2 shocks that are from a 2016 renegade 1000 xxc to put on my 2016 outty 850 xmr. Everything I read said they wouldn't fit because of the longer stroke of the shaft and would rip your headlights out under full compression. These people are wrong. They do fit without any clearance issues with stock tires. I installed them and winched the front end of my xmr down on a trailer until the shocks were compressed to the rubber stop and had a couple inches left until my tires would hit the headlight housings.
I gained 1 1/2 inches of shock travel but with the stock rc2 springs I lost 2 inches of ground clearance (10 inches in front from 12). I haven't had much time to trail ride it and make adjustments but I think I am going to put my xmr springs on it. I think the Rc2 springs are a little soft for the heavier bike. I don't care much about ground clearance. I would rather sacrifice that and have a plusher ride. It seems to be harder to wheelie too since there is better weight transfer when punching the go button compared to the stock shocks. It was too good of a deal to pass up on these RC2 shocks.
I gained 1 1/2 inches of shock travel but with the stock rc2 springs I lost 2 inches of ground clearance (10 inches in front from 12). I haven't had much time to trail ride it and make adjustments but I think I am going to put my xmr springs on it. I think the Rc2 springs are a little soft for the heavier bike. I don't care much about ground clearance. I would rather sacrifice that and have a plusher ride. It seems to be harder to wheelie too since there is better weight transfer when punching the go button compared to the stock shocks. It was too good of a deal to pass up on these RC2 shocks.
What do you guys use to shine/black the metal fenders?
Sorry, not sure what you call the black bars/cage/fenders used on the front of the Outlander.
What do you guys use to clean and make them more black?
Thanks!
What do you guys use to clean and make them more black?
Thanks!