Author: Forum News

Looking to order more sets of HID kits. Anyone have beam photos of both Hi and Low HID against a wall? Swapped in a a set of 4300k HID 9005's over lunch and they're an ugly blue color. Maybe as the bulbs were from a set of 55watters. Anyway, If anyone has some photos that'd be cool. Otherwise i'm sure i'll end up figuring it out.

Depending on how it functions I'd like to throw 55w 3000k HID's in the low-beam for a good flood throw but may consider swapping the low beam and high beam harnesses at the HID's kits so the projectors become low stuff them with 55w 4300k HID.


PS despite the 2017 Operators Guide - The H1 low beam bulb spec is still H11. Hopefully this helps someone. I'll post photos of what I end up with in return.

Anyone know if canam part # 715003250 will fit, plug and play a 2011 rene 800rxxc? Fitment guide only goes back to 2013, called can am directly, useless as usual. Thanks

Let the voting begin for the December 2018 Polaris ATV of the Month! We will leave the poll open until the end of the month and then announce the winner. We got some really good pics this month, thanks to everyone that participated and GOOD LUCK!!

rutcutter



2018 Sportsman 1000Xp
Havasu red pearl
3500# Polaris winch with wireless remote
2500# Badland rear mounted winch with wireless remote
Interco Sniper 920 tires
Elka stage 3 shocks
Ricochet 8 piece belly armor with UHMW composite slides
Bad boy airhorn
Tusk street legal kit
Bar end rearview mirrors
LED headlights
LED daylight driving lights
Koplin lock N ride tool/gun holders
Tusk heated grips and thumb warmer
Polaris rear third brake light
Polaris ultimate hand guards and mounts
12" quad row LED light bar
Rear LED flood lights
Bluetooth Firehouse sound system
Gen 3 Spot locator
Garmin 750T GPS/GMRS radio
Go Pro with mounts all over

knightwillob



Sportsman 450s his/her
2x LED pods
kimpex trunks

BruteForce



2018 Sportsman XP 1000 (Hunter Edition) <heated grips/throttle, gun scabbard, wireless remote winch w/synthetic rope>
Elka Stage 3 Shocks
Full end-to-end Ricochet skid plates
All LED bulbs
LED "driving lights"
Programmable (100 color variations) LED whip flag
Polaris Hand Guards
Utah Street Legal Kit (Licensed, train horn, turn signals, rear-view mirror)
RAM Mounts everywhere (for SPOT-X, GPSr, Motorcycle Phone Mount, etc)
4gal Rotopax Fuel pack with US Army issue rucksack cover (desert camo)
Maxxis VIPR tires
Henry Lever-Action .45-70 (for dropping Elk and Russian Boar!) <obviously I've removed the integrated scabbard for now>
Bluetooth handle-bar mounted stereo
10" LED Lightbar

gearheadesw1



High Lifter
2" lift
snorkle extensions
HMF swamp series w extension
led lights

kylem



Scotiaboy

Has anyone installed the Superatv EZSteer on a 2012 X2? If so, what model did you use and did you have to modify anything to install it?

Thanks,
jmak

admin has created a new social group called "test", with the following description:

To join this group visit the social groups homepage where this new group will be listed.

So this may be explained somewhere, but I wasnt able to find anything specific when I searched. Last ride I was on I took water in the clutch housing. Immediately after it was very hard to shift gears, but once in gear it moved as it should. The other day I went to move the renegade and no matter what gear it was in it wouldnt move only rev, but it was now shifting very easy. At first the secondary clutch wasnt spinning at all, but it popped while giving it gas and started spinning as it should, but now at idle the wheels are spinning at about 3mph. Any ideas or advice would be greatly appreciated. Thanks

Sent from my SM-G955U using Tapatalk

Does anyone know what the part number is for the front wheel bearings, or a size so I can try and buy a better bearing from a local auto parts store?

Hello fellas, so I have decided to get a set of HTR's for my 570 (it has the tan dalton spring and HMF pipe/tuner) however I would like some input/clarification. Threads and reviews - some say they run true to size others say they run big... I don't know if Kenda changed how they size them or not? So for one, do the HTRs today run big or not? Second, if I go with 26" will the fronts rub the a-arms or tie rods without spacers? Thanks so much everyone!

I recently installed heavier/bigger tires, compared to the stock Polaris/Carlisles tires that come on the unit. I am interested in installing a clutch kit to compensate for the lag. Any recommendations as to what kit to purchase? I've been looking at EPI and QSC. The difference in price is about $40 USD, with QSC being more expensive. Can anyone help a fellow rider out?