Author: Forum News

As I was riding I heard a strange noise as if the belt broke and when I took the cover off it seemed the secondary clutch bolt had come out and stripped the cam gear.

The new cam I purchased is retrofitted for that bike(shown in the picture).

I'm having trouble assembling the retro cam helix and the stock secondary clutch plate.

The bolt will go in but I cannot get the belt tool to expand the plates.
(do I need new plates? and also the new spring that fits into the helix?)
I saw a youtube video that showed a spring that was fitted into tits one in the helix the other in the clutch plate.

I'm not sure of the alignment of the clutch plates either as they came apart when the bolt snapped originally.


Here are a bunch of pictures, maybe you can find waldo.

Attached Images

File Type: jpg	10.jpg (131.0 KB)
File Type: jpg	11.jpg (127.2 KB)
File Type: jpg	8.jpg (128.4 KB)
File Type: jpg	9.jpg (106.4 KB)
File Type: jpg	4.jpg (101.3 KB)

My Superwinch needs a wire from the ignition switch to tie into. There is an open 4 prong plug and two single open wires under the front storage. I assume they’re for the Polaris Winch hookup. Does anybody know what color goes where? It says I need a brown wire from the ignition to the remote and handle bar controls. Thanks.

I am looking for a mount bracket for the Glacier 1 plow system for a 2000 Sportsman 335 part#2874774.i have part#2874773 mount for this system that I believe fits a 2003-2010.If anyone interested in buying it after I find one I need. Polaris says this part is no longer available, so I need help guys!!!

I should be taking delivery of my xmr in about a week, does anyone know where i can buy A-arm protection?

Can-Am does Not have these available yet and the ones from the 2019 xrc do not fit for some reason.

Also does the xmr and the arc have the same underbelly protection?

I should be taking delivery of my xmr in about a week, does anyone know where i can buy A-arm protection?

Can-Am does Not have these available yet and the ones from the 2019 xrc do not fit for some reason.

Also does the xmr and the arc have the same underbelly protection?

So after an accident some years ago, I finally got around to rebuilding my scrambler.

I'm trying to get it to fire and run. It will run on starting fluid but not on fuel. I pulled the carb and cleaned it throughout. It looked great. I believe I rebuilt it before the accident. I reset the float levels and confirmed I have fuel in the bowl.

If I cover the carb inlet with my hand and allow just some air through my fingers, it will fire.

What an I missing here? Shouldn't it for and run with an open carb intake?




Sent from my iPhone using Tapatalk

I've been working on my '04 Sportsman 400. It doesn't want to idle without the choke on, at least partially. It starts right away, but as the choke automatically goes in it starts to idle roughly and then sputters out. I bought this a few weeks ago and so far have replaced: air filter, fuel filter, gas in the tank, spark plug, oil change.
After its been driven around a bit it seems to idle better - but initially I can't get it to idle at a low enough RPM to put it in to gear. I have to push the choke in, wait for the RPMs to come down, throw it in gear and push the throttle quickly before the engine dies.
Looking for some direction as to what to explore/change. Thanks!

I've been working on my '04 Sportsman 400. It doesn't want to idle without the choke on, at least partially. It starts right away, but as the choke automatically goes in it starts to idle roughly and then sputters out. I bought this a few weeks ago and so far have replaced: air filter, fuel filter, gas in the tank, spark plug, oil change.
After its been driven around a bit it seems to idle better - but initially I can't get it to idle at a low enough RPM to put it in to gear. I have to push the choke in, wait for the RPMs to come down, throw it in gear and push the throttle quickly before the engine dies.
Looking for some direction as to what to explore/change. Thanks!

Hi team is there a match for polaris sportsman 400 wheel bearings other than ome?

I heard that you can adjust the secondary spring or something and get some performance back after bigger tires without doing a complete clutch kit.
Any ideas on this?