Posted on

Gear issue.

Hi, new to the forum and live down in New Zealand. I have acquired a 2007 Outlander 400 HO into my stable of bikes. Having some issues. when I got the bike the gear selection was and still is in reverse. Park is park and neutral is neutral, however in R it goes forward and L and H are 2 speeds in reverse.

Secondly, the 2 and 4WD aren't working, so I removed the motor, pushed the locating shaft in towards the motor to lock it into 4WD permanently, thinking this would be fine for the bush and hunting. when I started the bike again, my front wheels are going backwards and the rears forwards, so just a total no go and very bemused. I have a very good mechanical knowledge of bikes but this one has stumped me. any help would be very much appreciated.
Posted on

Gear issue.

Hi, new to the forum and live down in New Zealand. I have acquired a 2007 Outlander 400 HO into my stable of bikes. Having some issues. when I got the bike the gear selection was and still is in reverse. Park is park and neutral is neutral, however in R it goes forward and L and H are 2 speeds in reverse.

Secondly, the 2 and 4WD aren't working, so I removed the motor, pushed the locating shaft in towards the motor to lock it into 4WD permanently, thinking this would be fine for the bush and hunting. when I started the bike again, my front wheels are going backwards and the rears forwards, so just a total no go and very bemused. I have a very good mechanical knowledge of bikes but this one has stumped me. any help would be very much appreciated.
Posted on

2ritelobe2

1997 Polaris 500 Sportsman, Allways purchased parts during noon hour, finally came across a part that is a little different. Took off the old axles, overheard that there would be 2 different axles for this model. So trouble begins when the strut bearing only goes down, and lodges on the Clutch gears. The castle nut only threads up to the cotter pin, which isn't a real biggy because on the rest of the axle, the Hillard fits right, along with the wheel bearings also fitting. Does this sound familiar to anyone who may have purchased the wrong axle? Haven't came across a similar threat yet. thanks all!

Ritelobe
Posted on

Adding front headlight

I have a 2017 outlander 570 with only one set of lights and the other area is plastic. I would like to cut out and add headlights to that area. Has anyone done it ? If there is a existing topic please link it. I tried to search but havent come across anything yet.

Sent from my SM-G955U using Tapatalk
Posted on

weird question

i own a 2002 trailblazer and i know you can change the oil in the transmission but is there oil in the engine for the crank and connecting rods to stay lubricated and if so is there a way to change it just wondering i thought of it while changing my friends oil in his car