Author: Forum News

So I have had my bike for just about 6mths and I have put 25 hrs on it, I always from day 1 felt like it wasn't as fast as I thought it would be.

I drove it the other day and began to hear a rattle on the left side of the bike, I decided that I would do the 25hr service and try to locate cause of rattle, I took both foot wells off for oil change and to grease everything easier and I find that the rubber grommet that holds the exhaust has melted and the bolt and washer are rattling.

I also find the bolt to the left of the trunk above the exhaust is not holding and find the plastic melted and dripping on the exhaust wtf.

I plan to take it to the dealer Friday and see if it needs a reflash or something and see what can be done with the melted plastics. I also should mention my neighbor has a 2016 xt850 not a max, and we raced to 60mph and he puts 2 bikes on me, we switch drivers and have the same result. I really feel like mine should be faster or at worst even, because of my extra weight. I really think it's a computer/tune issue, my neighbors bike is also stock and shows no signs of melting plastic.

I see the clutch all over online, but upon watching a couple install videos people mention because of the 1000 platform you need to buy an extra sprint/weights, is this true? And if so where to buy them? 2013 renegade 1000 xxc

I see the clutch all over online, but upon watching a couple install videos people mention because of the 1000 platform you need to buy an extra sprint/weights, is this true? And if so where to buy them? 2013 renegade 1000 xxc

I have a 500 sportsman x2. when i go up the road it jumps to the left like it has slack in steering. I can not find any slack. This is not power steering. I have no idea where else to look. Please help as this is very dangerous.

Looking to replace the front axles of my '11 Outlander XTP Max 800. Any opinions on which one I should go w/? Stock and Rhino are $200 , the Titans are on sale for $150. Thanks for any suggestions.

Hi, long time Sportsman rider (2004 400 Hunter Model) owned for 12 years, used for hunting, plowing my driveway and work around my acreage.

A buddy offered me his 08 500 2X Touring with EFI at a decent price. Has 3500lb winch and snow plow. He owned it for 1 year and never used it. It's a better machine as I hunt in AZ and need to change the carb jets in the 400 every time I go there. Plus I can 2 up on it legally, in Iowa the DNR fines people riding double on ATV's $195. They feel it is safer to put another person on a sled (NOT!) we use them on lakes for ice fishing. And with EFI no choke is needed on the cold mornings.

I took headlight cover off on the Sportsman 500 and noticed the high beam wires were cut. Bulb was still there with two wire leads (yellow and brown) cut. (I had never tried the high beams the one time I drove it)

The machine has a plow and I wondered if the first owner would have cut the high beam and ran the switch wires to other lights? There aren't any on it, but often with plowing you can't see over the blade when it is up, so you run on high beam.

Any ideas why the high beams would be cut on this machine? I couldn't find the leads coming from the switch. I ruled out the mod and relay to run all three lights at once, heck the high beam isn't even connected.

Any mods out there common to these things I am missing? Are the wires coming from the switch the same color or does it go through a connector on its way to high beam bulb?

I have two other connectors not hooked to anything under the headlight dash cover. A black 2 wire squareish one and a white 4 wire one inline one with 5 volts on the two center contacts. Anyone know what these are?

Thanks

I have read all over the internet about the left side of the XMR getting hot and melting the plastics and/or the seat. I now own a 2018 XMR 1000 and based on what this post turns up I will be ordering the materials to wrap the exhaust and protection for the plastics and air box. This week though I will be adding the RJWC exhaust and having MR RPM do the flash. I feel that these 2 things alone should help right?

Thanks to everyone that chimes in on this subject.

youtube link:

I’m looking at some Maxxis Zilla tires for my atv. The current tires on the front are 26x8-12 and the Maxxis Zilla’s come in 26x9-12. Just wondering if anyone knows if they’ll fit or if that won’t work. Thank you in advance for any help.

Hi all! I currently own (from new) a 2005 Polaris 800 EFI. Use to do lots of trail riding with fire department buddies but now I just mostly use my atv for work around the house, like lowing the driveway in the winter. I’m also a volunteer firefighter and have used my atv along with other members of our department for rescue operations. Thank you in advance to everyone.