It got hit by a small stone, will this be an issue? It’s not overheating or leaking yet.
I did order a protector screen for it.
I did order a protector screen for it.
02 325 Magnum carb rebuild ?
2002 325 Mag. - I rebuilt my carb. with Moose kit 1003-0513 because I wasn’t getting enough gas or no gas to the carb. and everything else checked out. I also removed the screen/filters inside the gas tank and cleaned. Air filter & fuel pump is new.
2 things I noticed during disassembly were my air/fuel mixture screw didn’t have an o-ring or washer like what is in the kit. Also the main jet I removed said 120 and an “R” with a little square box next to it. The new main jet had 145 on it, which I installed. I also installed the new mixture screw with spring, o-ring and washer. I made sure to turn the original air/fuel mixture screw in before removing which was 2-1/2 turns.
When I fired it up it ran great, idled well, rev’d it a little and ran smooth but when I opened it up it makes a steady chatter noise like it isn’t getting enough gas or to much? So my question is – do you think the main jet is the wrong size from the kit ? Or your thoughts that might be causing the problem ?
Greatly appreciate any knowledge on this !
2 things I noticed during disassembly were my air/fuel mixture screw didn’t have an o-ring or washer like what is in the kit. Also the main jet I removed said 120 and an “R” with a little square box next to it. The new main jet had 145 on it, which I installed. I also installed the new mixture screw with spring, o-ring and washer. I made sure to turn the original air/fuel mixture screw in before removing which was 2-1/2 turns.
When I fired it up it ran great, idled well, rev’d it a little and ran smooth but when I opened it up it makes a steady chatter noise like it isn’t getting enough gas or to much? So my question is – do you think the main jet is the wrong size from the kit ? Or your thoughts that might be causing the problem ?
Greatly appreciate any knowledge on this !
New Video :D
The Best ATV Hunting Accessories for 2018
The Best ATV Hunting Accessories for 2018Turn your four-wheelers into the ultimate hunting companion more
The Best ATV Hunting Accessories for 2018
The Best ATV Hunting Accessories for 2018Turn your four-wheelers into the ultimate hunting companion more
’02 700 carb diaphragm spring
The spring on the diaphragm keeps popping out and lodging sideways when i pull the top cover off. I have checked the diaphragm for holes and could not find any. The atv will not hardly run when this happens. I have repaired it twice. Any ide why this would happen? Everything is clean and in good condition.
ISO Stock Exhaust for 2013 Scrambler 850 XP
Looking for full stock exhaust for 2013 Scrambler 850xp.
Thanks
Thanks
Intro
Hey all just thought I'd introduce myself, been on here a few weeks chasing advice.
I've come off an old 04 honda foreman 450 and must say I'll never look back!
We do mostly winching tracks, big climbs and mud holes.
09 800 Outy
26 x 11 x 12
26 x 9 x 12 (6mm spacers)
Raised rad and cvt snorkles in one unit
Warn winch with new synthetic rope
Led light bar
Folded some 3mm ally at work for front cv guards
And that's all so far.
Sent from my SM-G930T using Tapatalk
I've come off an old 04 honda foreman 450 and must say I'll never look back!
We do mostly winching tracks, big climbs and mud holes.
09 800 Outy
26 x 11 x 12
26 x 9 x 12 (6mm spacers)
Raised rad and cvt snorkles in one unit
Warn winch with new synthetic rope
Led light bar
Folded some 3mm ally at work for front cv guards
And that's all so far.
Sent from my SM-G930T using Tapatalk
New member
Hello I just recently purchased a 96 300 xplorer 4x4 and was wondering if anyone can tell me where to find any after market rims ?
550 Sportsman with 28” Anclas
Anyone ever run 28 Anclas on their 550 ? I’m currently running 27s on the stock 14” rims without issue. Just wondering before I buy them. Have a smoking deal lined up on a brand new set of 28s.