I need a wiring diagram for a 2009 Sportsman 550, so I can do a reverse override mod. Can anybody post the diagram?
1999 Polaris Sportsman Problem
Hey everyone, new to the forum here. I've got a 1999 Polaris Sportsman 335 4x4. This past winter i went through a pretty deep water hole. No mud just deep water. It ended up getting stuck and it was under water almost to the top of the motor for about 15 minutes until i could get it pulled out. Afterwards, the belt was slipping due to water getting in there. It slipped some while my buddy was driving and ended up shredding. Took it home and ordered a new belt and gasket for the casing, all new rear end bushings, and two new rear axles. All bushings and u joints were shot in the rear. Replaced all these parts when they came in and also changed the oil and oil filter. After doing this over the course of about a month i took it for a ride. It rode terrible, i couldnt hardly go over 15mph because it was hopping and jumping around so bad. I decided to take it to a shop i had been to before. He had it forever and changed the fluids out with new in the transmission/gearbox and decided that a chain needed to be replaced in the transmission. I dont know too much about the transmission/gear boxes on these ATVs. After doing all this it still had problems but it wasnt as bad the faster you went. On pavement you can hardly hold onto the handlebars under 10mph because it shakes so bad. Once you increase speed its still there but controllable. Does anyone have any idea what this could be? Its driving me crazy. I rode it like this for a while and one of the axles ended up breaking at the u-joint. I guess it was due to all the shaking. I'm thinking its something to do with the transmission/differential. Give me y'alls input.
Thanks
Thanks
Where to buy
Hi all, I've been given a 2000 Xpedition 325 and would like to know where the best place to buy good parts. Amazon,Ebay, PolarisParts123.com? I'd like to rebuild the carb etc. and just wanna get good parts. Thanks for any help/advice you can give.
RZR Broken mount from motor to transmission
Hello, I just bought a used 2012 rzr 570 and just noticed a broken mount where the engine attaches to the transmission. It is on the engine side and i have never had much luck welding that metal. anyone seen this or better yet know of a fix? I will try to add some pics.
Thanks in advance for any help.
Thanks in advance for any help.
Vendor Rules
1. Any and all commercial posting on the forum requires vendor credentials to do so. This includes: A business name Usernames, business information in your Signatures and or Avatars, soliciting in private message, and any and all commercial posting in threads. Failure to sign up as a vendor prior to commercial posting will result in your post being deleted and your account being blocked and or banned until the proper credentials have been added to your account
2. Before posting on the forum as a vendor please ensure to have your vendor tag on your account. If you’re having trouble with your account set up please email us at customerservice@verticalscope.com
3. Commercial posting is limited to either your personal vendor section or in the open vendor deals section of the vendor forum. If a member is looking for a product suggestion in the open forums it is acceptable to recommend a product that is relevant to the conversation but please keep it to a minimum and direct any subsequent conversation to private messages. Any vendor caught taking advantage of this rule will be subject to site infraction.
4. Vendors should be respectful of forum staff, members, and other vendors. If you have a conflict with a member, staff, or another vendor please send a private message to the site administrator.
5. All advertisements should include the price of the product and the dates the sale (if applicable) runs for.
6. Vendor and member with disputes over products, service, refunds, etc should try to keep discussion off the open forum. If you do have a dispute please try to keep it to private messages or off the forum.
7. Vendors are not permitted to use the member classified for advertising or selling products. These sections are intended for members to sell items they have, not for commercial posting.
8. Vendor group buys are permitted but should only be posted in the vendor’s personal sub section or in the vendor deals section.
9. Vendors who have purchased their own company specific section within the vendor section of the forum will have permission to moderate posts and threads in their own sections. This included editing posts, deleting posts, and deleting topics. This power is to be used to keep the section clean and organised and not for deleting negative feedback. Vendors caught deleting negative feedback can face an infraction up to and including being banned from the site.
10. Vendors will still be held to all regular forum rules, all violations of any site rules will be dealt with an infraction up to and including being banned from the site.
11. Please remember that this forum is shared by all and to respect the governing rules of the site. Please remember commercial posting is a privilege and must be kept to vendor specific sections, vendors are welcome to take part in regular conversations on the general forum so long as they are not commercial in nature.
If you`re a vendor on the forum and are encountering issues with your account or experience on the forum please contact us at customerservice@verticalscope.com for support.
2. Before posting on the forum as a vendor please ensure to have your vendor tag on your account. If you’re having trouble with your account set up please email us at customerservice@verticalscope.com
3. Commercial posting is limited to either your personal vendor section or in the open vendor deals section of the vendor forum. If a member is looking for a product suggestion in the open forums it is acceptable to recommend a product that is relevant to the conversation but please keep it to a minimum and direct any subsequent conversation to private messages. Any vendor caught taking advantage of this rule will be subject to site infraction.
4. Vendors should be respectful of forum staff, members, and other vendors. If you have a conflict with a member, staff, or another vendor please send a private message to the site administrator.
5. All advertisements should include the price of the product and the dates the sale (if applicable) runs for.
6. Vendor and member with disputes over products, service, refunds, etc should try to keep discussion off the open forum. If you do have a dispute please try to keep it to private messages or off the forum.
7. Vendors are not permitted to use the member classified for advertising or selling products. These sections are intended for members to sell items they have, not for commercial posting.
8. Vendor group buys are permitted but should only be posted in the vendor’s personal sub section or in the vendor deals section.
9. Vendors who have purchased their own company specific section within the vendor section of the forum will have permission to moderate posts and threads in their own sections. This included editing posts, deleting posts, and deleting topics. This power is to be used to keep the section clean and organised and not for deleting negative feedback. Vendors caught deleting negative feedback can face an infraction up to and including being banned from the site.
10. Vendors will still be held to all regular forum rules, all violations of any site rules will be dealt with an infraction up to and including being banned from the site.
11. Please remember that this forum is shared by all and to respect the governing rules of the site. Please remember commercial posting is a privilege and must be kept to vendor specific sections, vendors are welcome to take part in regular conversations on the general forum so long as they are not commercial in nature.
If you`re a vendor on the forum and are encountering issues with your account or experience on the forum please contact us at customerservice@verticalscope.com for support.
Dyno tuner near Chicago Suburbs??
Hey Everyone,
anyone know anyone that can tune my quad on a dyno in my area? Im in the north suburbs of Chicago. Did an internet search and only finding car dynos. TIA!
anyone know anyone that can tune my quad on a dyno in my area? Im in the north suburbs of Chicago. Did an internet search and only finding car dynos. TIA!
diode
The factory schematic shows a diode between (foot brake / hand brake) and brake light..Where is it located physicly on atv..
2002 trax xt 500 elect shift
2002 trax xt 500 elect shift
Need help with gauge swap
So I'm trying to swap out the analog gauge on my 06 outlander to a newer digital one from a 2008 outlander ho and I'm running into issues. Followed a good writeup guide on here and my pins aren't lining up. If I go by the guide I end up with a few wires that aren't even on pins in the speedo. Any ideas? For example, slot number 8 on the old display (should be 21 on the new one) doesn't have a pin on my 08 speedometer. Sorry for the blurry pics, camera is messed up.
Frame
Is the 2006 outlander 400xt frame the same as the max for same year and cc
Can-ams in the snow
Well, as a sledder, biker I would normally put my quad away this time of year and get the sled ready for some serious winter riding...My question is how many of you ride in the winter,what kind of depth of snow can they really handle,and is it cold as hell "No heated grips", What are you doing to your rides to get around... Is it worth it ... I'm in northern BC and -20 is common, with lots of powder and can ride sled and stay toasty warm...