I am looking to buy new shocks and was wondering what would be a good shock for fast riding over rocky trails. The guys I ride with have 900 and 1000 rzr's and fly over all the bumps and rocks and it beats the crap out of me trying to keep up. Any suggestions would be appreciated but I also don't want to break the bank thx in advance.
White Wash Sand Dunes and Tenmile Wash – 14 Oct 2017
Here's the second video of three I'll be posting from a three ATV Trip I did in the San Rafael Swell area in Utah. Hope you enjoy the video !!
...
...
Replacing a frame
How hard would it be to replace a frame in a sportsman 570? I have a sportsman 570 2015 EFI with a bent frame. Was thinking of just replacing the frame.
Predator 90, starters spins with brake pulled in, but not allowing spark to coil.
I have a 2004 90 Predator.
The brake switch was damaged a little, but the electric start would still crank the engine.
Sometimes it would lug and sometimes it fast spins, but it always started.
It has a brand new dry cell.
One day I noticed it would not electric start, but kicked started just fine.
Thought I saw an old post about a similar issue, but i can't seem to find it.
I think it mentioned a CDI issue?
In the process of trying to get it fixed up to give to a friend for his kid and just want to get it right.
Thanks in advance.
Steav
The brake switch was damaged a little, but the electric start would still crank the engine.
Sometimes it would lug and sometimes it fast spins, but it always started.
It has a brand new dry cell.
One day I noticed it would not electric start, but kicked started just fine.
Thought I saw an old post about a similar issue, but i can't seem to find it.
I think it mentioned a CDI issue?
In the process of trying to get it fixed up to give to a friend for his kid and just want to get it right.
Thanks in advance.
Steav
1996 Sportsman 400 Question!
Hi guys, working on a 96 Sportsman 400, The 4WD Was not working, So I bypassed the shifter switch splicing the Red and Gray wires together, Now I have 4WD, Only problem is it only works in Forward Gear, Nothing in reverse, Even while pushing the Override button, What should I do? Thanks for any help!!!!
1994 Polaris 300 Xplorer 4×4 Worth Keeping?
Hi All,
Brand new here, and first time quad owner. I took a gamble on this one for $200, hoping it wouldn't be too much of a project, but knowing at that price I could resell for twice that much if so.
I bought it all in one piece, with all the plastics, but it has turned out to be more of a project than hoped. Looks like someone drove it into the ground, tried to do some work on it but didn't know what they were doing, and put it back together again. List of what I see wrong with it SO FAR:
Got it running but won't stay running - comp checked out at 90 PSI
- needs top and bottom engine rebuild (play in con. rod bearings/piston and cylinder all scored up)
- tranny hard to shift into one of the forward gears (others OK) metallic sludge on dipstick, fluid red but foamy
- needs electrical work (no power to gear lights or headlight, finding random wires disconnected)
- rear brake totally shot, fronts are weak
- both CV boots ripped
- front left lower control arm needs to be replaced (someone broke it and tried to weld)
- seat all slashed up
- brake handle broken off
- missing front rack
- missing battery
- fuel shut off leaking
- snorkel boots need replacing
- air filter box has a big chunk taken out of (how?)
- tires dry rotting
- regular engine oil in the oil reservoir (no idea if the oil injection system works)
- engine only mounted to one of the two mounts (again, how?)
- Unknown as to what else might be wrong with it as I couldn't keep it running to try things out
Overall just one beat up machine the more I tear into it. I didn't think you could abuse a quad that bad and have the machine look decent from the outside.
So the question is, with $200 sunk into it, and now all apart, is it worth keeping and fixing up, or should I just sell it? I wasn't prepared to spend a lot of time on this, but am willing to do the work myself and make it a long term project if worth it. At the same time, if I can get $400 for it, and then spend another $400 - can I get an equivalent machine but running, or needing a little bit of work for $800?
Thanks for the feedback!
Brand new here, and first time quad owner. I took a gamble on this one for $200, hoping it wouldn't be too much of a project, but knowing at that price I could resell for twice that much if so.
I bought it all in one piece, with all the plastics, but it has turned out to be more of a project than hoped. Looks like someone drove it into the ground, tried to do some work on it but didn't know what they were doing, and put it back together again. List of what I see wrong with it SO FAR:
Got it running but won't stay running - comp checked out at 90 PSI
- needs top and bottom engine rebuild (play in con. rod bearings/piston and cylinder all scored up)
- tranny hard to shift into one of the forward gears (others OK) metallic sludge on dipstick, fluid red but foamy
- needs electrical work (no power to gear lights or headlight, finding random wires disconnected)
- rear brake totally shot, fronts are weak
- both CV boots ripped
- front left lower control arm needs to be replaced (someone broke it and tried to weld)
- seat all slashed up
- brake handle broken off
- missing front rack
- missing battery
- fuel shut off leaking
- snorkel boots need replacing
- air filter box has a big chunk taken out of (how?)
- tires dry rotting
- regular engine oil in the oil reservoir (no idea if the oil injection system works)
- engine only mounted to one of the two mounts (again, how?)
- Unknown as to what else might be wrong with it as I couldn't keep it running to try things out
Overall just one beat up machine the more I tear into it. I didn't think you could abuse a quad that bad and have the machine look decent from the outside.
So the question is, with $200 sunk into it, and now all apart, is it worth keeping and fixing up, or should I just sell it? I wasn't prepared to spend a lot of time on this, but am willing to do the work myself and make it a long term project if worth it. At the same time, if I can get $400 for it, and then spend another $400 - can I get an equivalent machine but running, or needing a little bit of work for $800?
Thanks for the feedback!
550XP EPS touring with 4600 miles…worth considering?
A fella down the road has a 2014 550XP EPS touring with 4600 miles on it. That is a lot more miles than I like, but I figure it means it does not have the dreaded valve issue right? He used it for scouting fields in an ag business.
Should I be scared of it? What would be a fair price?
Should I be scared of it? What would be a fair price?
Replacing Headgasket
Hi Everyone. A friend of mine has a 1999 Sportsman 500 that has Antifreeze bubbling out of the overflow tank. I have validated the fan is working, the waterpump is working and I have bled it several times. Small bubbles are coming out of the radiator cap.
I am planning to replace the headgasket and check the head for cracks. My questions are the following:
1. The manual says you do not have to remove the engine to pull the head, but wanted to confirm this is easy to do or would it be a lot easier to remove the engine?
2. I assume I should replace the base gasket too, but would love to hear what everyone thinks.
Thanks
Rob
I am planning to replace the headgasket and check the head for cracks. My questions are the following:
1. The manual says you do not have to remove the engine to pull the head, but wanted to confirm this is easy to do or would it be a lot easier to remove the engine?
2. I assume I should replace the base gasket too, but would love to hear what everyone thinks.
Thanks
Rob
Steering stem squeaking creeking
2016 xxx 1000
Steering to the left or right when not moving and possibly when moving has a loud squeaking creeking. Is there an area to lube ?
Is this normal? Sounds horrible
Sent from my SM-N950U using Tapatalk
Steering to the left or right when not moving and possibly when moving has a loud squeaking creeking. Is there an area to lube ?
Is this normal? Sounds horrible
Sent from my SM-N950U using Tapatalk
LSR A-Arms
I purchased some LONESTAR DC-4 Long Travel A-Arms for my 2008 Polaris Outlaw from ATVGALAXY.com
They were shipped to me directly from LSR with the right part number and the description said DC-4 LONG TRAVEL
They look like the sport arms to me... Can anyone with LSR A ARMS confirm which arms these are? Shouldn't they have a cross member brace up near the mounts of the lower arm? and also I didn't think the lower shock mounts on the DC-4 arms were a tab style like these...
I called LSR and apparently they know nothing about the arms they manufacture for the Outlaw...
Pictures below, Thanks guys!
They were shipped to me directly from LSR with the right part number and the description said DC-4 LONG TRAVEL
They look like the sport arms to me... Can anyone with LSR A ARMS confirm which arms these are? Shouldn't they have a cross member brace up near the mounts of the lower arm? and also I didn't think the lower shock mounts on the DC-4 arms were a tab style like these...
I called LSR and apparently they know nothing about the arms they manufacture for the Outlaw...
Pictures below, Thanks guys!