Hi guys, been a while since I've posted but I'm at a loss here. The quad is a 2013 renegade 800r. The problem is I go through left rear wheel bearings like crazy. I only get about 100-200 miles from each bearing, and this is the only corner that does this. I've replaced all wheel bearings and the other 3 are in perfect condition.
I've tried oem bearings, all balls, cheap eBay brand, they all went bad at the same rate. I've put 3 bearings in the trailing arm since spring. I grease the bearings with a greaser, use a press to get them out and in, and tighten axle nut to 150 ft lbs which is spec.
The most recent replacement, I also installed a new axle and hub to determine if either of those was the issue. I got the same result. The first 2 bearings this summer were with 27" swamp lites, the most recent junk bearing is with 30" silverback mt2 with 1" spacers. This setup had no effect on the bearing as it went bad in the same time frame.
What could I possibly be doing wrong? Am I missing something here? In a Facebook post I read that someone had a floating hub to resolve bearing issues, does anyone know about these? Thanks in advance for the help!