Dalton clutch kit question

I just received my clutch kit from dalton today
It says it comes with guide to calibrate the primary flywheel. Here is my issue
It came with three different weight rivets to use with different size tires.
2.1g Olive for 29.5 to 30 inch tires
0.85g Aluminum for 31 to 32

There is a black set weight 2.8g. Looking at the others and the tire sizes it makes sense that the heavier weight black rivets would be for the stock tires which are closer to 28.5 to 29inches tall in spite of the size on the side of the tire of 30inches
So I am wondering if anyone has any input into this and has actually installed this kit using stock tires
Sorry this for a 2016 xmr1000r

Check out this engine!!!

I know this is a powersports forum, but we thought we would give you an idea of the other capabilities nFLOW has in house. In addition to our powersport engine reman program, we can also build engines for the industrial, ag, auto and boat industries. Below is a picture of a recent Big Block Chevy boat engine we built in house for a customer. You can find more pics of the various offerings nFLOW has by visiting our FB page www.facebook.com/nflowmotorsports/ or by going to www.nflowmotorsports.com. Thanks and hope you enjoy!

Attached Thumbnails
Click image for larger version

Name:	Big Block Chevy boat engine.jpg
Views:	N/A
Size:	89.2 KB
ID:	90753  

wheel offest1

Does anyone know where i can find a 12x7 rim with a 3+4 offset? seems there isant such a thing.... would prefer just plain, stock type steel Polaris rims.... any ides or help would be greatly appreciated !! :)

Clutch – Muffler – Tuner

Installed the CVTech that does make a difference it does make some noise at idle. Thought would like to hear the 1000cc installed the Yoshimura Slip On like the sound. Last item to complete the mods ordering the DeBeck EJK Controller.

Pre Wired Winch harness and SuperWinch Terra 35

Hi all,

I am a new 2017 Sportsman 570 owner as of yesterday and have been looking at winches to install on this ATV. I have been looking at Warn and Superwinch and have heard some great things about the Superwinch and the price is hard to beat. One of the main selling points for me on the 570 was the preinstalled Winch harness. I wanted to ask some questions now that I have done some research. Is this harness only designed to plug into Polaris branded Winches or would it work on something like the Superwinch Terra 35? I know you have to run your leads to the battery and what not but having the convenience of not having to fish extra wires is nice and I'd like to use it if I can. Second, do I need a mount kit to install any winch including the Superwinch T35? I read where KFI makes a good mount, does anyone else have experience with this mount? Lastly, has any other forum users used the Superwinch T35 and what are your thoughts on the installation and experience with using this winch?

Thanks for your time!

Marcus

Changed my mind to an 850..

Well I had a deal worked out on a 17 570sp. Was going to pick it up tomorrow. Ended up changing my mind to an 850sp. Im hoping I made the right choice. I mean bigger is better right lol... The 570 was priced at 6700 and the 850 is price at 7900. I have the bumpers and winch picked out for it.. What else do I need fellas?

2017+ XP1000 Skid plate Install

Happy Friday everyone! As promised, here is a short review with some pictures of Swedish Performance Offroad Parts (SPOP) skid plate off of Amazon for our quads with curved A-Arms.

Install difficulty - Low to Moderate

Pain in the ass factor - Extremely high

The Pros: Good finished product. Strong Plastic and very thick. I guess that's all you could ask for, yea? Delivery time was very short for a foreign delivery.

The Cons: Weak install instructions. There are only 5 pages total and 3 of those 5 are CAD drawings. Given the black and white instructions, it's hard to make out where some parts go. Missing hardware (had to go to hardware store twice for nuts and bolts). Some bolts, especially for the lower skid plate that attaches in factor holes, were way too short. Not very precise bends in some areas. I did not install the front skid plate because the snow plow doesn't fit with this on (doesn't fit with Iron Baltic either).

This project took 2 long evenings after work. I don't know how they think it'll install in 1-2 hours given how much you have to fight the enclosed hardware. And, I sure as hell wouldn't try to install this without having a second person.

Once done, I think it'll add substantial protection and be very worthwhile.

Thanks,
Tom

Attached Thumbnails
Click image for larger version

Name:	IMG_20171016_173716.jpg
Views:	N/A
Size:	3.40 MB
ID:	90721   Click image for larger version

Name:	IMG_20171019_214047.jpg
Views:	N/A
Size:	4.14 MB
ID:	90729   Click image for larger version

Name:	IMG_20171019_214102.jpg
Views:	N/A
Size:	3.37 MB
ID:	90737   Click image for larger version

Name:	IMG_20171019_214134.jpg
Views:	N/A
Size:	3.92 MB
ID:	90745  

Broken tie rod end

I've sleeved the tie rods so they are pretty much unbreakable. We just broke an end. Who makes the toughest replacement that will thread onto the oem tie rod? Are the tie rods different side to side?

Check engine light/keep dying

Hey everyone, I got a 2015 sportsman 570 efi. Has about 2200 miles/600 hours. I use it everyday for soil testing. Been having a lot of issues with it lately. A few weeks ago it wouldn't run after a few hours when it got hot. Dealer replaced the fuel pump and wrapped the tank with heat shield. Last week I broke the throttle lever. Replaced it with an aluminum one and it ran fine. Today it was about 80 degrees. After a few hours of running. It died. Check engine light came on. Took gas cap off and there seemed to be some pressure. Added more gas thinking it might cool the gas down in tank. Seemed to work when fuel pump started to fail. Didn't help. I didn't know how to get the code. I had to start it multiple times to get back to the truck. When I gave it gas it would hardly move. Tried backing up on a hill and it wouldn't move. Acted like it didn't have any power to wheels. Back fired a little bit. It kept dying even at idle. After I got home I started it. The check engine light is no longer on but it only runs for about 30 seconds before it dies again. It starts up right away again though. It will rev up but it still dies weather at idle or giving it gas. Tried searching the forms and I can't seem to find anyone that had this issue. I checked to make sure the throttle cable was tight. Thought maybe it had to do with me messing with throttle lever. When I let off the throttle quickly the two metal contacts touch in the throttle assembly(is that what it's called?). Doesn't seem to affect weather it dies or not. Anyone got any ideas? Thank you

Polaris Quality

So i took my 1000 to get a ceramic coated clear coat on it, to see if it helps with the cleaning after each ride. So looking at the top of the head light i see the separation of plastics. Is this normal ? Nothing crazy for me , just wanted to ask...

Attached Thumbnails
Click image for larger version

Name:	IMG_1063.jpg
Views:	N/A
Size:	562.2 KB
ID:	90681   Click image for larger version

Name:	IMG_1064.jpg
Views:	N/A
Size:	569.7 KB
ID:	90689   Click image for larger version

Name:	IMG_1062.jpg
Views:	N/A
Size:	626.1 KB
ID:	90697