Category: Forum News

Happy to find this forum, already found some really good stuff. Having a blast with our new Maverick Max.

I had a 97 Polaris sportsman 500 given to me by my grandfather the other day, it has been sitting for a few years, but the problem is, someone hit a tree stump while riding it a few years ago and it messed up the front left side, all of that got fixed a few years ago new strut, new a arms and everything was straightened out, after my grandad fixed all of that he tried to crank the motor up and he said it cranked up for a minute and cut right back off and he couldn't get it to turn over again, so a while back I was over there and I tried to crank it with the pull cord and it won't move at all, I put a battery in it and it wouldn't do anything, I pulled the starter and it is good, pulled the cover off the belt, all of that looks good, pulled valve cover and that looks good, I'm just trying to figure out if i need to pull the motor out and start tearing it apart or where I need to start here, any help would be greatly appreciated

Hello everyone. Just joined the forum. I posted in the model specific forum about a 2003 Sportsman 700 that has been sitting for 4 years. Fuel leak when fuel is turned on, won't idle, and smokes. Never owned a 4 wheeler before so any guidance would be very helpful.

I have a 2003 Sportsman 700 that I may buy. It has been sitting for 4 years. I put a new battery in it and got it started. It smokes pretty bad and wont idle. There is also a lot of fuel leaking from underneath. I also noticed a line leaking from below the gas cap housing. Maybe an over flow tube?

This quad has been rear ended by another quad and the back fender, fiberglass and cargo rack are broken. Is there still a source for these parts?

Any and all direction would be appreciated.

position bins hpv hpv nevi skins and other parts of your body And here are a few plantar hpv hpv nevi skin elimination options: Cryotherapy - fluid nitrogen used to secure the nevi skin Excision - local pain-killer and knife or curette (sharp spoon-like instrument) to cut out the nevi skin Electrosurgery - hpv hpv nevi skin cut out with curette and then around tissues cauterized (burned) to create sure destruction of sickness. Chemical therapy -a caustic or level of acidity (e.g., salicylic level of acidity or trichloroacetic acid) used on break down contaminated epidermis. Over-the-counter exterior therapies - some solutions contain concentrated salicylic level of acidity. Natural therapies - There are several of secured and simple indicates of eliminating hpv hpv nevi skins in the home. Planters hpv hpv nevi skins are more a issue, literally, nevi skin
than they are a hazard to health and fitness. Plantar hpv hpv nevi skin elimination can performed in various techniques. Some of these techniques vary from the services of a epidermis professional or podiatrist, and often a doctor. These services may come at a cost, however, as reduction of hpv hpv nevi skins may not be secured by family members health and fitness insurance plan strategy coverage. You should consult your insurers. If you are one of the millions of People in america having difficulties from vaginal hpv hpv nevi skins, hpv hpv nevi skin elimination is something you need to comprehend more about. Like most hpv hpv nevi skins, the vaginal hpv hpv nevi skin is not only distressing to behold, it is situated in the most inconvenient locations, and all too often is a source of discomfort, discomfort, and discomfort. What could be more excessive than preparing for a romantic night with your loved one, only to find that you have developed one of these hideous cancers in your most intimate parts? There are various vaginal hpv hpv nevi skin elimination, some costly, cumbersome or painful; others cheap, simple, and pain-free. We'll offer you with some choices to comprehend more about so that you can go for yourself which technique or therapy techniques are best for you. First, you must ensure that if you are going to manage a hpv hpv nevi skin it is indeed a hpv hpv nevi skin and not various issue. Nevi skins are little masses of bumpy, cauliflower-like thickened epidermis. These cancers or harmless cancers are activated by any of a individuals papillomavirus (hpv) group of viruses. They can appear just about anywhere on the whole whole individual body. Specifically, vaginal hpv hpv nevi skins (i.e., condylomata acuminate), also known as venereal hpv hpv nevi skins, are hpv hpv nevi skins that create in the vaginal area or around locations. Nevi skins on male organ and vaginal area hpv hpv nevi skins are the simplest types of vaginal hpv hpv nevi skin. But they can also appear in the rectal, rectal and perineal locations, upper thighs, nut sack, cervix, and even the mouth or throat (as a result of oral sex). These cancers look like frequent hpv hpv nevi skins, but appear only in particular locations of a individuals individual body.

http://menshealthcme.com/nevi-skin/

Hey everyone, new guy from Newfoundland, Canada here. I'm an aircraft maintenance engineer and don't have much free time to ride but I'm hoping everyone's doing well and I'm looking forward to learning a lot from you all in the future! Thanks in advance for all the knowledge and help.

14 outlander 500 max xt dps 4500 miles


Sent from my iPad using Tapatalk

Hey everyone, thanks for viewing my post. I'm new to the forum and I have a few questions about my 2004 ATP, specifically why my rear end failed. I received this bike from my father in law, and prior to him it had only had one owner. Both previous owners only used the bike for hauling wood and moose, not much else. Upon receiving my quad, I took it upon myself to service it front to back, changing all fluids, greasing all bearings and all that good stuff. When I was out on my second ride on the bike, I was going up a small hill on a fairly steep incline (30-40 degree) and the rear end totally failed. At the time I was not sure what happened but I heard a loud pop and started rolling backwards. I soon found that I only had front wheel drive and managed to limp it back home. On closer inspection I found that the rear driveshaft was jumping over the spines on the rear end and was not capable of any power output whatsoever. The input splines for the rear differential are totally bald but the driveshaft splines seem fine. Did Polaris really make the driveshaft splines with a harder metal than the rear end? Is this a common occurrence with Polaris ATV's? Or ATP's? And does anyone have any insight as to why this may have happened in the first place? As I said, the bike was used very minimally prior to myself owning it, but the use it received from previous owners was definitely more rigorous than what I am intending. This repair will cost me around $1000 (new input gears, driveshaft, seal kit, mounting bolts, oils, etc.) and I just want to make sure it wont happen again. Thank you in advance for any insight into this problem, anything and everything is appreciated! I will attach pictures of the splines as soon as I transfer them to my computer.

New to the forum. Got a 2011 Sportsman 500 HO. I wanted to introduce myself to the group.

I purchased my full set of JCCapri bushings in August of 2014 and have put a little over 2300 miles on them since. I'm pretty hard on my quad and tend to ride on some rough trails so I'm not complaining by any means.

The bolts are all torqued to spec and I've checked to make sure it's not the mounting holes. I do have one hole that is worn out on the upper right rear a arm but the ones I'm seeing the most movement out of are the lower front a arms.

I'm not sure if I'm going to go back with JCCapri or go with Garage Products. I'll probably end up going with GP just because they come with new sleeves and carry a lifetime warranty. They are a little more expensive but they'll make installing the SLC rear HD arched arms easier.

Next time I'm in the garage I'll try to get some video of the movement.