Posted on

Air fuel mixture

Hello
I'm new to the forum. I found this site searching form my problem. Looks like a awesome site.

Anyway I am rebuilding my carb on a 03 sportsman 500 ho. After days of soaking and heating I finally got my mixture screw out. I need a replacement screw. Does anyone know where I can get one? I searched all over the web. I don't think any of the diagrams even show it. The only place I havent made it to yet is a dealer.

Any help is greatly appreciated
Thanks in advance
Posted on

01 sportsman idles up and down after warm up

My sportsman 500 needle and seat went bad filled the motor with gas I changed the oil put a new needle and seat in now it's seems to be running a little rich the plug gets black sute on it. It also idles up and down after running for awhile and will some times quit. Any ideas what I should check ?
Posted on

New design DPS motor

Any body notice for the 2018 model year the power steering motor has been redesigned. Wondering if its better than the previous motor for hard or no assist at idle or stop.
Also wondering if you can convert to the new style when needing a new motor.
Posted on

Time frame for 2018 Rebates?

I see that Can Am currently has the yellow tag event for 2017 and older models. I'm looking at getting a Renegade 850 in the spring based on past history does Can Am usually have any deals running at this time? I know I can get the financing and I know the dealership I am going to ( they sell for less than MSRP ) but I want to save as much as I can but I dont want to wait months to do so either. So with that said does Can Am usually have a set time on when they offer rebates or yellow tag events?
Posted on

5 Ways To Improve Your Polaris RZR Suspension



If you own a Polaris RZR and want to take it to the next level, look to the suspension. Here are 5 ways to improve your Polaris RZR suspension.

There are an awful lot of Polaris RZRs out there bombing down the trails, slamming over the dunes, blasting across the deserts and screaming along just about anywhere a Side-by-Side can go. These are some great machines and ones that definitely have made a major impact on the sport as we know it. They’re fast, fun and extremely good. But are they perfect? While they may be perfect for some, others may find areas that could stand some improvement.

One area that gets some attention from the aftermarket is the suspension. While stock Polaris RZR suspension is extremely good for all-around use, more adept drivers may find they need more. Luckily there is a wide range of ways to improve the suspension on your RZR.

Check it out here: 5 Ways To Improve Your Polaris RZR Suspension - ATV.com
Posted on

CVTECH Primary Clutch gen 1 800

Does anyone have any current info on the CVTECH Primary? Most of my research was from threads several years old. I have an 07 outlander 800 XT HO. It has full exhaust, muzzy digituner and ITP 589 27" wheels (pretty heavy). It has a dalton spring kit in it currently and it's pretty fast but will never wheelie in high gear. My buddy has a stock 08 800 xt and he has had 25" and 26" tires on his. Mine feels faster but is heavier and has some mods done. CVTECH is half the price of everything else for a full Primary and I'm mostly doing trail riding. I'd like more get up and go but will not do any more mods (BBK, etc). Will this be a big improvement over the dalton springs and will my engine braking not be affected?
Posted on

Frame measurements

Hey All,

My son has a 2016 Rene 1000 and the front right wheel has a wicked camber misalignment. Also the distance between the centerline on the hubs is 3/4 of an inch longer on the right than it is on the left. Dealers are puzzled and don't seem to want to dig into it. He has about 1 week left on warranty. He did tip it on its left side but this side is fine. He bought it with 300 miles on it and we suspect the PO damaged it. I would like to find the specs for the frame so we can take some measurements. Hopefully this weekend before his warranty is up.

Any thoughts guys as to where I can get the frame specs?

I appreciate any help,

Dave
Posted on

Steering popping out of place and back in?

I am new to the atv world as i just bought a 2002 Polaris Magnum 4x4. Everything is running fine except the steering column seems to pop up and out when i pull on the steering/ handle bars. This happens most when im riding up hills and am holding on with my body weight behind it. Any ideas? I have a feeling it is a loose nut somewhere but i cant seem to find it. I can still ride with it but i dont want it to get worse. thanks, ben