Trickle charging battery on 2011 Out,ander 500

Can I hook up a CTEK (56-864) MUS 4.3 12 Volt Fully Automatic 8 Step Battery Charger, ( ), to the battery on my 2011 Outlander 500 without any problems?
The charger comes with an extension that I can attach to the battery terminals and just plug to the charger when needed.
Just wondering if there are any issues?
Thanks

New member

Hi im masen injust joined . I have a 2009 renegade 800 and i love it, any tips for mainteneance or what to watch out for in the long run?

Exhausts

Recently went through a series of RJWC exhausts, and none fit well - we believe that because I have a 2017 XXC with an XMR bumper the pipe's fit was off. End of the day the pipes are returned and I'm looking for a new pipe. Things I liked about the RJWC dual canister system was the look and the deep throaty sound, but as much as I liked the sounds it was quite loud to listen to for hrs of riding, so any new pipe needs to be at the lower end of the noise spectrum.

I've found as options pipes from HMF, Big Gun, Two Brothers, Neils pipes, straightline performance, and Barkers exh. From what I've read Muzzy's seemed to be the favorite but as they're no longer made they're not an option. I continue to read reviews and forum comments, but none of these stand out as a clear choice, and for every good review a mfg has, there are two others who say they're the worst. maybe they're all the same, or it's just a function of what you can get, or personal preference, but I'll ask for my own requirements

- which one of these pipes offers the best balance of performance and noise? I'm happy to sacrifice some performance for a reasonable drone and not go deaf. If there's an exh i missed please let me know, but look forward to any comment people have.

Thanks in advance......

2016 570 eps rear suspension way too soft

Hey everybody I have owned my 2016 570 eps for a year and a half and the rear suspension has bin going soft, after talking to some people and reading post on forums here and there decided to adjust preload 1-2 steps and it made it better for a couple rides but I had to repeat again and again after every couple rides, now I'm at the max and the lower A arms sits level and even squats to the right a bit and the sway bar link is hiting the muffler and can't find part number anywhere for spring. Some help would be appreciated and if anybody has a cross-reference for springs.

Outlander 450 opinions

Looking at buying a Outlander 450 as a 2nd four wheeler. Currently have a 2016 Honda Rancher. I have to admit I'm a bit gun shy about Can am. Is there any reason to be? Any problems with this model that I would run into? Please chime in.

Polaris winch 2500lb/3500lb

So I have conflicted information... I was told a 2500lb polaris winch is 100% the same as a 3500lb polaris winch with a synthetic rope VS cable.... Why is there an upgrade fee?

Adding another caliper & rotor to rear

I tried to do a search but must not be doing it right. Looking at my 2016 650 max xt it looks like everything is there to mount another caliper and rotor on the rear axle on the wheel that does not have one. Has anyone tried this? If you put a T fitting in the line could another caliper be bolted in and double the stopping power? Just a thought after looking at the rear setup I at first thought they forgot to put one side on but after reading the specs it says single disk rear.

Hello

I recently purchased a 2013 STS and I am looking for any information I can find to make my owners experience better.