Thank you for Add , new owner 570 sportsman blue :|
In dire need of a Front Master Cylinder for 2000 Traxter
I have been looking for either a rebuild kit seems to be harder than a unicorn to locate, or a good used one. I have a 2000 Traxter 500 4X4. Mine just started leaking and won't hold pressure. New to the site. Thank you for any help on this. It has the Brembo 10.4689 Master Cylinder for the front brakes.
H11 leds? Dime a dozen right? Do they work?
Ive been searching through threads about upgrading my stock head lights to leds. I see an ongoing struggle with people trying to find ones that work. Amazon has tons of reasonably priced H11 leds with great reviews. Any reason why they wont work/fit? Whats the problem with getting leds for these head lights?
Here's one of many examples :
https://www.amazon.com/gp/aw/d/B01LC...MGL&ref=plSrch
Here's one of many examples :
https://www.amazon.com/gp/aw/d/B01LC...MGL&ref=plSrch
Connection under seat
Hello. On my 2017 HD8, I noticed a wire connection under the center passenger seat. What is this for?
Thanks for any help as this is my first UTV.
Thanks for any help as this is my first UTV.
2008 renegade 800x winch wiring
Working on my buddies renegade 800x and previous owner wires the winch to work with the key off, so it's been draining his battery.
I see the small red wire coming from the solenoid and he has it wired to the positive cable on the solenoid. What wire can I tap into so it only works with the key on? I thought about the ignition wire but also read that it's not good to tap into ignition due to computer. Seams like 12v cigarette lighter has constant power also with key off so can't tap there . Any help is appreciated. Can am is new to me, I'm used to working on Yamaha and polaris
I see the small red wire coming from the solenoid and he has it wired to the positive cable on the solenoid. What wire can I tap into so it only works with the key on? I thought about the ignition wire but also read that it's not good to tap into ignition due to computer. Seams like 12v cigarette lighter has constant power also with key off so can't tap there . Any help is appreciated. Can am is new to me, I'm used to working on Yamaha and polaris
New owner
Hello everyone. Picked up my new Defender HD8 and loving it so far! Still in the break in mode, so not a lot of hours or miles yet, but that will change! :)
I live in Arizona and most of my use with the Defender will be hunting and cruising forest and desert roads.
I live in Arizona and most of my use with the Defender will be hunting and cruising forest and desert roads.
Fan won’t shut off
I have a 08 trail boss that the fan stays running until you unplug it, stays running even with the key off. is this the controller module?
Fan won’t shut off
I have a 2008 330 trail boss and the fan runs unless I unplug it, even with the key off. Is this the control module?
2011 Polaris Sportsman XP Wont Start Please Help
Hello everyone. I am new here. This one has me stumped. So from the beginning I took my ATV to the shop they charged me 500 dollars and told me my front differential was bad. Instead of spending 2000+ to fix it we had them disconnect the front axle. Need less to say this did not fix the chugging problem it was having.
I am familar with working on small engines so I ended up taking out the fuel tank and finding a gas can lid directly below the fuel pump and filter. Put it all back together and now all I get is a click when I turn the key. The fuel pump runs for a second like normal turn the key and it just clicks. Checked the battery it's good. Replaced the starter and solenoid. Wires and fuses seem fine. I am out of ideas any help would be greatly appreciated.
I am familar with working on small engines so I ended up taking out the fuel tank and finding a gas can lid directly below the fuel pump and filter. Put it all back together and now all I get is a click when I turn the key. The fuel pump runs for a second like normal turn the key and it just clicks. Checked the battery it's good. Replaced the starter and solenoid. Wires and fuses seem fine. I am out of ideas any help would be greatly appreciated.
Yoshimura Exhaust
What is the best tuner to use with a Can Am Yoshimura exhaust?