can any one help me fined out how to program my fmf power comander for my 08 canam renegade 800 im putting on a 860 BBK from Mr. rpm:th_smiliewavey:
Can’t get Primary Clutch Off! 850 Sportsman
I was going to change the spring in the primary clutch and clean up my clutches on my 2011 850XP. I bought a EPI clutch puller, cranked it in until there are no more threads showing and the clutch still hadn't let go. I put the clutch retaining bolt back in cranked it to 47 ft lb took it back out and the threads on the puller cranks in by hand until I can't see any threads! From the tip of the puller to where the threads start is 3 3/4", from the tip to the end of the threads by the bolt head is 5 1/4". Not sure if other pullers are longer, my local dealer doesn't have one in stock. Any ideas?
HMF Exhaust | Polaris Sportsman 850 SP
The Polaris® Sportsman® 850 SP is available as a Slip-On exhaust system in the Titan-QS and Titan-XL Series. Each exhaust series picked 2 horse power with 1.5 lb/ft torque. The quieter Titan-QS exhaust series is 1dB louder than stock at idle, and 5dB louder at Half-Max RPM. The louder Titan-XL exhaust series is 3dB louder than stock at idle and 9dB at Half-Max RPM, and each series weighs roughly 6lbs less than the stock exhaust.
Exhaust Fits:
(2017) Polaris® Sportsman® 850 SP
Does Not Fit:
Polaris® Sportsman® Touring, X2, and/or XP
https://www.hmfracing.com/exhausts/p...ortsman-850-sp
Exhaust Fits:
(2017) Polaris® Sportsman® 850 SP
Does Not Fit:
Polaris® Sportsman® Touring, X2, and/or XP
https://www.hmfracing.com/exhausts/p...ortsman-850-sp
New to me 2015 Polaris ATV
I have had it several months now. I traded a 2013 Honda Rancher 4X2. It was a electronic shift, great ATV.
But sometimes I needed 4WD. This one is automatic and hi\lo with 4X2 or 4X4 selection. Plenty of power.
It already had the rails on the front and back. It had the brush guard front and back. I felt I got a great deal.
It only had 85 miles on it. Gets a little hot on the right leg. I modded up a heat shield but have not got a chance to test it yet.
The only issue is the battery drain. Starting to research that now.
Hope to learn a lot on here.
But sometimes I needed 4WD. This one is automatic and hi\lo with 4X2 or 4X4 selection. Plenty of power.
It already had the rails on the front and back. It had the brush guard front and back. I felt I got a great deal.
It only had 85 miles on it. Gets a little hot on the right leg. I modded up a heat shield but have not got a chance to test it yet.
The only issue is the battery drain. Starting to research that now.
Hope to learn a lot on here.
2012 Commander 1000X interior heat
I have finally decided to address the interior heat and noise problem with my commander. I just joined this forum and can't seem to find any pictures or discussion on doing the interior covers etc. Can anyone point me in the right direction with this? I have used the search with no luck. Any help will be greatly appreciated. Brent
2015 Polaris Sportsman Battery Drain
I have searched and searched, I cannot find a good answer for my issue. I bought a used Sportsman with 85 miles on it.
The battery is drained when it is off and sitting for a period of time. I bought a new battery and I keep a spare. I keep a trickle charge on it.
The other day I unplugged the charger and after a few days it would not start again.
I have checked all the basics. Cleaned everything. I added a winch but the problem was an issue before that.
Thanks for the suggests.
The battery is drained when it is off and sitting for a period of time. I bought a new battery and I keep a spare. I keep a trickle charge on it.
The other day I unplugged the charger and after a few days it would not start again.
I have checked all the basics. Cleaned everything. I added a winch but the problem was an issue before that.
Thanks for the suggests.
2017 450 esp gear noise,
when I first move my atv from being parked, there is noise coming from what seems to be the rear. It sounds like the gears are not meshing correctly. The noise goes away after a few hundred feet. There is only 10 hours on the atv. is this normal or is a trip to the dealer required.
2002 500 4×4 scrambler model year changes
I just bought a 2002 500 4x4 scrambler with a transmission problem. Can anyone inform me as to what years are the same mechanically. I have downloaded a 2009 service/repair manual free and it appears to be the same as my 2002. Please advise.
August 2017 ATV of the Month!
August 2017 – Polaris ATV of the Month Voting!
Let the voting begin for the August 2017 Polaris ATV of the Month! We will leave the poll open until the end of the month and then announce the winner. We got some really good pics this month, thanks to everyone that participated and GOOD LUCK!!
andwes03
2015 Sportsman 570
QSC Clutch Kit
Kenda Bear Claw HTR's
Viking front brushguard
12 LED light bar
Custom made LED flush mount headlights
LED High beam
Heated handgrips and thumb warmer
Polaris Rear Tough Rack
Modified Polaris Lock and Ride rear storage box
2 LED pods mounted to rear rack for reverse lights
2500lb Polaris Winch
Warn Provantage Snow Plow
R2C Air Filter
Cecco racing billet aluminum thumb throttle lever
Polaris Handguards
ErikLand
2005 Sportsman EFI 800
KFI 2500# winch
Leinhauser01
2012 Polaris Sportsman 850 XP HO EPS Limited
Montana Street Legal
Big Gun EVO Exhaust
K&N Filter & Pre-Filter
14" Bandit Wheels
Rear Rack Extender
Rear Brush Guard
2500lb Polaris Winch
bp405
ITP T-7 Beadlock rims
Maxxis Bighorn 2.0 tires
GURU front and rear brush guards
ROTO-PAX gas can
Kolpin over fenders
QSC clutch kit
mikelanglois
2016 Polaris 570
26" Maxxis Zillas
Polaris Hand& Thumb Warmers
Polaris Warn 2500lb Winch
Kolpin Rear Storage Cargo Box
PdxJeff
2013 Sportsman 400
Front & Rear bumpers
Light bar
Winch
Hand guards
Front & Rear rack extenders
27x9-14" Front Ripsaw Rt
27x11-14" Rear Ripsaw RT
14" Badlands Wheels
BlueFire570SP
2015 570 SP Touring
SuperMidget
2001 Sportsman 500ho Ducks Unlimited Special Edition
22" Front Rack Mounted LED Light Bar
12" rear light bar mounted between the rack & brake light
4" LED Pod Low Beams
2500# Winch
DIY Passenger Seat. Boat seat/2 ammo cans mounted on a board mounted with clevis pins for quick removal.