2008 Polaris Trailblazer no start/run

I have a 2008 Polaris Trailblazer 330 that has been flawless since purchased new. My grandson was riding it about 10mph and gave it some throttle and it made a bang that sounded like a gunshot. I looked over the machine and cannot see any damage.

Motor is not seized, I can use the pull rope. The only electrical thing that works is the overtemp light and it stays on with key on/off. Engine will not crank over with start button, no head/tail light etc. Battery is full charge. With key on, I try to rope pull start and it does nothing. I have to unhook battery to get the over temp light to go dark.

I have checked start solenoid and it checks out.

There looks to be 3 things it could be. CDI Assy(3088209), Controller Module(4011831), or the RPM Limiter(4011856). I downloaded the service manual and about to see if I can troubleshoot each one to hopefully find problem. Want to make sure as each of these parts are ridiculously expensive.

Has anyone had similar issue of nothing working(except over temp light) after what appears to be a backfire?

reverse

when i put the bike in reverse it will stall but if i hold the override button down before i shift into reverse it works fine, why is it doing this....

Pricing 2013 Outlander 1000 DPS

Hello, I'm selling my 2013 outlander 1000 DPS, it only has 280 miles and 34 hours on it. The only mods are full skids and the XT front and rear bumpers. Love the machine I just don't have time to ride and am buying a defender which will fit my needs better. The dealerships offer crazy low amounts on a trade in so I want to sell on my own, what is a fair number? I've looked up blue book and NADA but they only list average sale price, there is no way to take into effect the low hours and mileage. Thanks

110 outlaw mods

I recently bought a outlaw 110 for my son because it fits him better than his lt80. But it’s soooo much slower. What’s the best way to get more power from it? I plan to regear for more top speed. But the motor feels very limited. Has anyone tried the rev limiter removers or fuel programmers?

Replacement Battery for 2013 550’s

ATV's have been sitting in my pole barn all winter...no power out there, so couldn't get a battery tender on them.

The 550's have been starting and running all winter, but this past weekend I got the dreaded 'click-click-click'...

Was able to jump start them.

Is it worth putting the charger on them? Or am I getting new batteries?

Polaris part number is 4011138 / CCA 220

Brand recommendation? I'm seeing some on-line for around $120 each (Duracell gray case AGM).

Issues With Heated Passenger Grips

Does anyone have any more information about installing the passenger heated grips on the Outlander Max? I am installing a set for my brother in law. It is a 2018 Outlander Max 1000 XT-P. The instructions are not very clear as to where the harness plugs in up front. I found a connector that is dead ended into a white plug. I plugged the harness into the connector and the other plug into the white dead ended connector. Is this correct or does that have to go into another spot? The left side is getting warm but the right side is not. The wire harness that BRP provides for under the seat doesn't seem very well built. The wires are very lose in the connectors. I tried pushing in on these but still the right side is not getting any heat. I am going to have another look at it tonight and check the wires to see what ones are getting power. If someone can share any input on this or had similar issues it would be a great help. Thanks

can am renegade 800 2009

Hello,
do you have any idea why oscillation reluctance? I changed the spark plugs and it still has a small oscillation of 1050-1250-1300 rpm / min ... it also has some rhythm rates ....
When cold, the engine reaches 800rpm and stops

new

HELLO

I am IRINEL from Bucharest, I purchased a Can am Renegade 800 from 2009, Canada.





Thanks a lot: Th_smiliewoo:: Th_smiliewoo:: Th_smiliewoo:: Th_smiliewoo:

XMR1000r Skid Plates

Hi guys. Can someone suggest some aftermarket skid plates ?

I need the front A Arms skid plates and the one from the front under the bumper .

XMR1000r 2018