Category: Forum News

Was interested in seeing what kind of numbers folks have been getting off their machines? I am running 91 octane non ethanol fuel and plan to only run this fuel. If anyone has any experience and numbers, would be great

I would like to know a few things about the 500 HO ignitions. My 2001 has a 2 position key switch and starts with the LH 3 position switch. off/ run (push up)/ off. My 2002 has a 3 position key switch. Off/ on/ start. Spring loaded to on and no LH start. The switch in the 01 has gone bad and I see 4110264 as the original switch. Superceded by 4012163. This seems to be the new switch number for both years and starting methods. Is this correct?

Just purchased an 02 Polaris Sportsman 500 H. O. This quad is a beast and I’m excited about it just quurious to why or what I’m not doing to get it in 4L. I don’t have an issue going in 4h but I shift in 4L it’s like it’s in neutral. Any advice is appreciated and glad to join the Group.

Hey guys. As you know I am new here. I converted from Kawasaki and I love my defender!!! I do have questions about the machine though. First, Do I need to be worried about the reverse chain? I was shocked when I looked at the parts manual and saw it had a chain. I know the polaris guys have a time with their reverse chains. If they are a problem, what recommendation do you have to beef it up. Second, I am wanting to run some wires through my cage to the roof. I see at the top of the cage on the drivers side there is a hole there already. Is there a hole at the bottom of the cage behind the dash or something? How is everyone running their wires to the roof? Third, I have seen on youtube some guys are running 33" tires and say they didn't have to add a lift. Is this actually possible? Thanks for any answers you may have to my questions.


Danny

hello i'm new to the forum and i'm looking for info for my 2017 850 xxc. I'm looking for clutch kits and ECU flashed. I've read monster and wick-it for ecu? Can't seem to find much on clucth kits thought. Also where is everyone finding aftermarket stuff? Bumpers, racks, handel bars, etc...

Thanks in advance!

Hey guys!

I need help with this adjustment....

I understand the adjustmend on the front cylinder...screwed the tensioners in till they were barely touching the guides, then installed the caps and springs...thats ok.

But in the back cylinder cannot be like this...becous i unscreved the tensioner and the chain moved back with tensioner...so thre cannot be the same procedure like by front cylinder... if i screved tensioner back in for just one turn tehy touch the gouide...

Can somebody please expland procedure for the back cylinder

Please..thanx

Hey guys!

I need help with this adjustment....

I understand the adjustmend on the front cylinder...screwed the tensioners in till they were barely touching the guides, then installed the caps and springs...thats ok.

But in the back cylinder cannot be like this...becous i unscreved the tensioner and the chain moved back with tensioner...so thre cannot be the same procedure like by front cylinder... if i screved tensioner back in for just one turn tehy touch the gouide...

Can somebody please expland procedure for the back cylinder

Please..thanx

Hi,
does anybody have the 2019 Outlander max xt-p 1000 yellow paint code?

I plan to have a few road trips here and there when I am comfortable with the new machine. Not least for the getting to the government safety check when that comes around in a few years but also for other outings.



We (perhaps obviously...) have a legal requirement for EU approved road legal tires, and also for proper snow tires in the winter - ideally studded in my experience with other vehicles - and a summer relevant tire too. I am not a fan of all seasons if there is such a thing.


The surfaces for such trips are asphalt and hard pack and a tiny bit of gravel - probably mostly a 50/50 mix of the first two as I would be sticking to our rural back roads rather than the main roads. In the winter they may or may not be covered in all the various different depths and types of snow and ice. It can go down to -30C (-22F) coldest.



So I am after some recommendations please! I am after the right tools for the job because its worth it to be safe and legal.

Hey, I Was given a 1995 trail boss and was working on the rear brake and it looks like its missing what ever holds the brake disc on the shaft. I can't seem to find out what holds it on. Can anyone tell me what i need and where to get it. Thanks for any help.