Category: Forum News

Do you all think I could attach my winch to the bumper in the center after routing it through a snatch block so I could pull myself out of whatever i might be stuck in?




Sent from my iPhone using Tapatalk

Today I went with some buddies riding an iced over small creek.

2 times we climbed up off the creek up steep inclines of about 2-3 feet, nearly straight up.

My machine (xmr 570) immediately started to blow white smoke from the exhaust once I made it to the top. It cleared up after about 10 seconds or so.

My girlfriend has a Outty 570 as well and hers did not smoke climbing the same banks.

Does anyone know what would cause this, and should I be concerned?

Bumper is very solid, but... top bolts had no clearance due to tube protruding inside (need to move rearward), and side supports pushed under hood tub up, had to soften plastic with heat gun to relieve stress. Thinking of sending them pics for manufacturing adjustments for the next guy’s benefit. 2017 ACE 570.

Attached Thumbnails

       

Hi everyone! After 3 years of Mavericks I'm back to the renegade scene! I just about stole a 2015 1000 xxc with tracks. It was a deal not to be missed. When I picked it up it had the tires on it so as soon as I got home I put the tracks on it. I have no track experience but install was straight forward. I noticed some of the rubber guides for the boogie wheels were chewed up but didn't seem terrible. So with a foot of snow and up to three feet in the snow drifts I was off! What a blast... Till it spit the front track off. Talk about not fun. I believe what the issue was the front track wasn't tight enough. It ripped off some of the rubber guides.

So here's my question. I know they are Apache tracks it says it on the track. I would like to buy new rubber tracks for the front. Is that a thing? Do they sell just the track? Are the Apache and the Apache 360 the same? I haven't been able to find parts diagrams for them. Any help or leads are greatly appreciated.

Attached Images

File Type: jpeg	18240_1549152698736.jpeg (874.4 KB)
File Type: jpeg	18254_1549152705551.jpeg (884.8 KB)
File Type: jpeg	18255_1549152710089.jpeg (769.6 KB)

Is this upgrade a Must or is it a hard core mud bogging enhancement using big tires etc ?

Hello everyone, just purchased a used Renegade with 300 miles on it. Didn't notice how tight the steering was until I went for first real ride today. Making a creaking noise when I turn bars. Have a feeling things dried up from prior owner not using. Any links videos or suggestions greatly appreciated.

Just purchased. 2018 850 outlander north edition. Looking forward to using the forum.

I looked thru the index of topics and don’t think I saw anything. Did I just waste money on this stuff? Saw a side-by-side that had been riding all day was just Clean. I asked him and he said he sprays it every so often with something. What is best to use? Thanks!

Attached Images

File Type: jpeg

2AF1D2A9-273E-4E4E-A019-F0EDE9984907_1549145032507.jpeg (800.9 KB)

My Traxter is not moving. While driving it, it popped out of gear (High > Neutral). When I put it back in High, it would not move. Sometimes the wheels would turn for a second, then stop. The engine could rev, but the clutch doesn't seem to be engaging. I got the Shop Manual and made a Diagnostic Jumper, which showed previous error codes of 3 (Clutch Modulator Valve), 8 (Accessory/Speedomoter Supply), and 9 (STPS [Sub-Transmission Position Sensor], GBPS [Gear Box Position Sensor] sensors). But after clearing the memory, now it doesn't report any error codes. However, sometimes when I press the shift (1,2,3,4,5) button, all five (1,2,3,4,5) lights will flash. I cannot find the Solenoid Diagnostic Harness (PN 529-035-653) to test the solenoids. Is there another way to test these?
Thanks in advance.

I need to test my Traxter 5 speed clutch and shift solenoids, but the Shop manual says to use a Solenoid diagnostic harness PN 529-035-653. I cannot find one of these. Does anyone have a circuit diagram for one of these? I am sure that it would be simple to make one.
Any other help would be appreciated. Thanks.