ok so i bought a atv the was in a building that caught fire atv was not damaged much but some melted plastics but the owner took carb off before fire happened and the boot for the carb to match with the block i guess shrunk and is hard now from the heat is there any way i can make it work again like boil it in some water all i need is for it to go back over the carb
2006 polaris sportsman 700 efi starting problems
Hi new to this forum but hoping someone can help me out here. I have a 2006 polaris sportsman 700 efi quad sat for awhile wouldn't start so I replaced fuel pump and regulator and 2 new injectors. The only way I can someone get the quad to fire and kinda idle is if I almost completely restrict the air intake. I have put a fuel preasure gauge on at the rail and shows less then 10 psi when turning key to on position. I'm alittle baffled here my first fuel injected quad and I'm alittle lost right now is it still the fuel pump or regulator possibly a bad one I got.? Any help would be greatly appreciated
No hours no miles
Just purchased a used 500 HO. Hour meter and ODO not working. Is there an easy fix for either? Thanks
Loonet tuned exhaust for my G2 650
Does anyone know if I will need a tunner, I’m looking at buying the looney tuned slip on for my 2016 outlander 650 xt? Haven’t really found much about it.
can am 650 cc outlander
can am outlander 650 cc 2 seater , and I have message that need engine maintaince soon, need to get rid of that message and also brake light does not work
pls help 2008 year
thanks!
pls help 2008 year
thanks!
can am 650 cc outlander
can am outlander 650 cc 2 seater , and I have message that need engine maintaince soon, need to get rid of that message and also brake light does not work
pls help 2008 year
thanks!
pls help 2008 year
thanks!
Quadboss Pile driver snow plow ???
Hey folks anyone else use this plow?
The plow kept popping off my atv. After investigating it. Found out that the linkage rod cotter pin fell off. So I fixed that. Reattached it, Seemed to be good and it came off again. Then realized that there's supposed to be a spring on the latch hook. Well the part number for the hook is HDW9203. I cant find it anywhere.
So anyone else use this plow and loose this spring? If so what size spring you replace it with. Getting tired of laying in snow trying to get this plow on and have it fall off. Thanks in advance for any help.
The plow kept popping off my atv. After investigating it. Found out that the linkage rod cotter pin fell off. So I fixed that. Reattached it, Seemed to be good and it came off again. Then realized that there's supposed to be a spring on the latch hook. Well the part number for the hook is HDW9203. I cant find it anywhere.
So anyone else use this plow and loose this spring? If so what size spring you replace it with. Getting tired of laying in snow trying to get this plow on and have it fall off. Thanks in advance for any help.
Quadboss Pile driver snow plow ???
Hey folks anyone else use this plow?
The plow kept popping off my atv. After investigating it. Found out that the linkage rod cotter pin fell off. So I fixed that. Reattached it, Seemed to be good and it came off again. Then realized that there's supposed to be a spring on the latch hook. Well the part number for the hook is HDW9203. I cant find it anywhere.
So anyone else use this plow and loose this spring? If so what size spring you replace it with. Getting tired of laying in snow trying to get this plow on and have it fall off. Thanks in advance for any help.
The plow kept popping off my atv. After investigating it. Found out that the linkage rod cotter pin fell off. So I fixed that. Reattached it, Seemed to be good and it came off again. Then realized that there's supposed to be a spring on the latch hook. Well the part number for the hook is HDW9203. I cant find it anywhere.
So anyone else use this plow and loose this spring? If so what size spring you replace it with. Getting tired of laying in snow trying to get this plow on and have it fall off. Thanks in advance for any help.
2002 Scrambler Ignition problem or what?
My Scrambler was working fine last week with the 1st round of snow, but as I was heading out to do a neighbors drive, I got the end of my driveway and it stopped for some reason. But I could not get it started again that evening. I would turn the key and nothing would happen. Not even turn over and no click or the relay.
So the next day after doing some trouble shooting, I thought it was a bad starter relay. I ordered a new one and installed it. Samething, nothing happened, no click. I even check the main fuse in the sealed pouch under my seat. It was fine.
So I was needing to plow, so I pulled the wire harness off the back of the ignition, place a wire in the power and other end in the starter wire. It started right up. I was that wire to power my light. And I also placed a second wire in the power wire and then powered my plow with that one. I hope that makes sense.
So thinking that I have a bad ignition switch, I ordered a new one of those. But that did not solve my problem either.
Looking for any insight on what might be wrong. Thank you for your time.
So the next day after doing some trouble shooting, I thought it was a bad starter relay. I ordered a new one and installed it. Samething, nothing happened, no click. I even check the main fuse in the sealed pouch under my seat. It was fine.
So I was needing to plow, so I pulled the wire harness off the back of the ignition, place a wire in the power and other end in the starter wire. It started right up. I was that wire to power my light. And I also placed a second wire in the power wire and then powered my plow with that one. I hope that makes sense.
So thinking that I have a bad ignition switch, I ordered a new one of those. But that did not solve my problem either.
Looking for any insight on what might be wrong. Thank you for your time.
2007 Outty 650 question
Holy firckity frack. This thing is not the easiest to work on.
Anyway..
Is there an easy way to lube the rear wheel bearings OTHER than taking the arm off? Front ones done with the little insert. Rear is being a pain.
Thanks!
Anyway..
Is there an easy way to lube the rear wheel bearings OTHER than taking the arm off? Front ones done with the little insert. Rear is being a pain.
Thanks!