Popping in intake

I have a 2015 xmr 570 that is making a popping noise through the air intake whenever I give it throttle. It bogs down and then will occasionally rev up when pressing the throttle. Any help is greatly appreciated.

Popping in intake

I have a 2015 xmr 570 that is making a popping noise through the air intake whenever I give it throttle. It bogs down and then will occasionally rev up when pressing the throttle. Any help is greatly appreciated.

Do I need a tune? I need help

Just bought a 2017 renegade 1000 xmr with 60 hours on it, already ordered a RJWC full exhaust, also seller gave me a brand new in box OEM radiator relocator, so my question is,
Do I need a tune?
If yes, how to choose the right one, i was reading for days and there's a bunch of options, so i hope somebody can chime in and advice, im not planing on make more mods, maybe an air filter and that's it.

Flashing dash lights and nothing works?

Hi all! New here...I have an 07 outlander max Xt 500 w 800 miles on er’. She’s been great. It was dead yesterday, been all summer since I ran it but I pulled the batt and charged it showed 12.74 volts put er back in and it clicked once and the dash lights just go crazy now and no headlights or anything. Pump doesn’t prime and it just blinks like crazy...any ideas?
Thanks in advance! Doug

Snow Plow

Ok, so I have a 2018 Outlander 450. I’m looking into investing in a snow plow. For anyone who has experience with this, what do I need to look at and what do I need to buy? Can-Am brand? Universal? Steel? Poly?

Thanks!

Getting the bike going again

Hey guys. Getting the bike going after sitting for too long, tires are all weather checked and leaking air. I'm looking at some new wheels Rocktrix 12x7 4+3 offset, if anyone has used them how were they? Also how does a 27x12-12 mounted on a 7 wide tire fit under the rear of the 07 700 sportsman? Recommendation on a good budget tire mainly for trail, light mud, and farm use?

Need help. 1998 sportsman 500. No electric.

I have a 1998 sportsman 500. And I can’t get anything electrical to work. But if you pull start or jump the starter it will start an run fine. Both key an kill switch will shut it off. But no headlights,fan or 4x4 will work. I have replaced the solenoid and the breakers. But still no luck.

2013 sportsman 500 ho (no spark)

I have a 2013 sportsman 500 ho that I’m getting no spark from. The bike has been sitting for a while. I charged the battery and went to start it yesterday and it wouldn’t start for nothing. I decided to pull the spark plug which was filthy so I went and bought a new one. Got home and still no spark... I did recently replace the ignition since I lost my Keyes for this bike and I have never started it since then. I went with a cheap ignition switch online could that be causing this? Only reason I think it wouldn’t be is the motor is turning over. Any help would be appreciated

2016 850 Highlifter starting issue

Greetings! I have an 850 highlifter and it runs great!

However, after I have ridden for a bit (5 miles or so) and I shut it off, it will not restart. I wait 15 minutes or so and then it starts right up no issues.

When this happens and I turn the key to the run position, dashboard light comes on as usual. When I turn key to "start" position, nothing happens with the starter....no solenoid click, no turn over. Lights stay on on dashboard. For example, it is like I am not pulling in the brake lever when attempting to start. But I am pulling the brake lever and still nothing. I have also tried it in park and neutral which would bypass the brake lever and nothing.
It is not overheated, it is not wet, it is not run hard.
Battery and charging system is fine
I have attempted to wiggle connections and that makes no difference.

The only thing that makes a difference is letting it sit for 15 minutes or so and then it will turn over and start right up.

Dealership is stumped.

Any great ideas out there!

Thanks in Advance!

Fox shock springs

I have a 16 xxc 1000.
The front shocks dive and roll like crazy. I think its not keeping up with my size/weight (6'2" 225lbs).

Any advice to what springs i should look into.

And my springs are set almost as firm as they can go

Sent from my SM-N950U using Tapatalk