Who makes a good trailerable atv cover?
Camco black boar front storage box.
I recently purchased a Camco black boar storage box. I couldn't find much information about this particular storage box online, so I figured I would write a review. It is the front storage box, but I mounted it to the rear of my 2010 outlander. It came with all of the necessary mounting equipment (u bolts) and 2 keys for locking the case. The Camco has 2 metal latches and it came weather stripped to keep dust and water out of the box. I have not submerged it yet to test how water proof it is, but It seems like it will keep the elements out pretty well. (I will update this post once I submerge it, too cold in PA to go through deep water currently) . The fittment was perfect and the Camco is big enough for me to carry most anything I need for a long days ride. I am extremely pleased with this storage case so far, and priced at $130 I felt like the price point was very good. If anyone has any questions I am willing to answer them.
clutch weights
Are 10RH clutch weights the same? Seems prices are all over the place.
2018 Renegade 570 xmr exhaust
I have searched on different web pages and sites for an exhaust (slip on preferred) for this bike. Everything so far excludes 570 or xmr models or possibly fits. Looking for something that is known to fit....it’s on a Christmas list I’m trying to fulfill! Thanks for any input!
Can Am 800 Max Xt 2008 ECU TUNE
Hello everyone , please i need help ! I Have HMF exhaust , K&N air filter !
Looking forward for ECU TUNE , any help is much appreciated !
Who is the best in it ? Price ? And they can send ecu file and load it myself ?
I tune cars and load ecu tune with my laptop and thru OBD2 , is there the same procedure for ATV ?
Thank you
Looking forward for ECU TUNE , any help is much appreciated !
Who is the best in it ? Price ? And they can send ecu file and load it myself ?
I tune cars and load ecu tune with my laptop and thru OBD2 , is there the same procedure for ATV ?
Thank you
98 500 compression issues
Howdy,
So here is my story.
This quad has been a great machine thus far. it started to have the usual hard to start issues so I ordered a new cam, and rockers off line. parts came and I tore it down and replaced both rockers and cam, reset timing and it fired right up. Still had a hesitation on the initial rollover, I thought maybe my starter was going tu so I replaced it. No change. I havent done anything since cause of regular life things until tonight when it started snowing. Went out to shop fired it up and made it about 500 yards and it died. Hit the starter and it just rolled over like it had no compression. got off of it cussed at it a minute and walla it had compression again, drove it about 80 feet and it died again. Drug it back to the shop and started messing with it. pulled valve cover off and everything seems to be moving freely up and down like it should. got it to refire and it ran for a few minutes then the no compression thing again. I can put my hand over the exhaust and it will suck and blow through the exhaust pipe. any ideas?
Thanks in advance.
So here is my story.
This quad has been a great machine thus far. it started to have the usual hard to start issues so I ordered a new cam, and rockers off line. parts came and I tore it down and replaced both rockers and cam, reset timing and it fired right up. Still had a hesitation on the initial rollover, I thought maybe my starter was going tu so I replaced it. No change. I havent done anything since cause of regular life things until tonight when it started snowing. Went out to shop fired it up and made it about 500 yards and it died. Hit the starter and it just rolled over like it had no compression. got off of it cussed at it a minute and walla it had compression again, drove it about 80 feet and it died again. Drug it back to the shop and started messing with it. pulled valve cover off and everything seems to be moving freely up and down like it should. got it to refire and it ran for a few minutes then the no compression thing again. I can put my hand over the exhaust and it will suck and blow through the exhaust pipe. any ideas?
Thanks in advance.
500 HO: Cam tensioner reset / affect on compression relief
Trying to troubleshoot the compression release on my 2001 Sportsman 500. The starter and pull cord are locking up. I adjusted the valves. I noticed when the flywheel TDC mark is at the hole in the recoil housing, the two dots on the gear to the cam shelf are not quite at the top of their travel. I have not yet checked the decompressor as described elsewhere on this forum. I did remove the chain tensioner for the OH cam. In trying to reset it, the pawl does not hold the plunger in place. Is this a sign of a worn tensioner. If the tensioner is worn, oils this cause the lock up I am experiencing?
Beadlock rings back from powdercoating
Going on my xmr 850 outlaw 2s
Beadlock rings back from powdercoating
Going on my xmr 850 outlaw 2s
BKT 171 actual tire size!
Is anyone running these tires, I bought some 28s for my sons bike and they are measuring about 26”, WTF, they aren’t mounted yet, I was considering getting them for my xmr to replace my outlaws but not if they are running that small