Category: Forum News

Need help

4wd blowing fuses after driving over down tress in the bush. I unplugged wiring harness to the to the front diff and I do not blow any fuses. I did find a bear wires and taped up and reconnected to the front diff still blows fuse when key is turned on. An the sector is in 2wd or even in 4wd.

I'm wondering if the problem is in the front diff its self.


Thanks

My first can am. Currently has 200km. Was out for a drive, took key out to go r a hunt, pushed key back on ball ignition and it wouldn't start. Played around withe gear position and still wouldn't start. Finally got going....made it home.. took key off and tryed to start later...it wouldn't start. Not a lick of juice...
A buddy told me to ensure the ball and key have no moisture and have squeaky clean connection or it will not start.
Sure enough. ..a little wipe..and I couldn't see any thing on the ball or key. ..and it started. Wtf. Anyone else have this issue?
Thks.
Brad

can anyone tell me if the 2019 model 6x6 max is coming with itc throttle and three driving modes websites show the model having these features but some dealers tell me there not on the 6x6 can am

hi
in my registration i have tires size 23/8-12 , the problem is i can't find them any where .
the size i got offered is 25/8-12
can some one know if it's ok?
what is the size limit for the trailblazer 330 ?
aprixciate your help
thanks

Hi guy new to the site, got my Can-AM about 2 months ago.


Sent from my iPhone using Tapatalk

Has 137 hours and 1500kms on it. I have never owned a quad before but the owner says he has serviced it himself. He sent me that when it gets wet, a code is thrown P0339 Cranshaft signal fault. Says it needs some silicone or a harness replacement.

It has an exhaust mod, a lift on it. I've heard CanAm are very reliable but I dont want to make a big mistake. $5500 CDN.

Thoughts? Thanks in advance.

Need help

4wd blowing fuses after driving over down tress in the bush. I unplugged wiring harness to the to the front diff and I do not blow any fuses. I did find a bear wires and taped up and reconnected to the front diff still blows fuse when key is turned on. An the sector is in 2wd or even in 4wd.

I'm wondering if the problem is in the front diff its self.


Thanks

Hi guys is anyone selling any aftermarket floor boards for can am renegade 1000? i have 32s on my atv and they're already rubbing holes in the plastics :sad

thanks guys

Hi, new member here. Sorry if this has been covered in another thread.
My 2004.5 Sportsman 500 HO is not charging the battery. My ECM has been updated after the recall with the new SurePower module, I have a new battery, it will start and run fine (although the battery drains quickly), but no charging voltage is going to the battery. The stator has been checked and all three legs are putting out the right AC voltage at the proper rpms.
I am keeping the new battery charged using a Battery Tender. Starting voltage only drops to 12.3, so I know the battery is solid.
Any ideas on what else I can check?

Looking to up grade my headlight bulbs to really bright ones,any ideas on what kind of
Plug or kits or led bulbs I can get