I have a 2013 Polaris sportsman 550 , I was hanging a deer with it and left the key on after using the winch , -15 •c . 3 days later went to move it and noticed key was on , battery dead . Tried hooking 12 volt charger up to battery and it won’t charge . Tried hooking booster cables up to truck (with truck off )and nothing . Any suggestions would be greatly appreciated .
Digital Dash problem
Hey guys I have a 2018 850 sportsman and my digital dash/instrument panel is having some problems. It will come on and off at random times. It will also flicker a bunch at times. The blue light goes on and off then sometimes the gauges/speedometer go on and off. It's like a loose connection or something. At first I pressure washed it and thought I may have got some water in the connector. Pulled it apart dried it out and put some electrical grease in it but no fix. Any help is appreciated
Tie rod mod 2000 Scrambler 400
I had a 2001 Scrambler and have to rebuild it after a hard but that bent the frame. I got a 2000 frame to rebuild it on. There is a difference in the steering post and tie rod end placement.
The 2001 uses a similar post but with bushings welded on to lower the tie rod placement. The 2000 places one tie rod between the bolt flanges, and another with a bushing in the middle and the tie rod below the flange.
Has anyone ever placed both tie rod ends either between the flange or added a second bushing and placed both of the below? I would think adding a second bushing and placing them lower would add stability and more range of motion. Having them offset seems odd to me. Any thoughts?
The 2001 uses a similar post but with bushings welded on to lower the tie rod placement. The 2000 places one tie rod between the bolt flanges, and another with a bushing in the middle and the tie rod below the flange.
Has anyone ever placed both tie rod ends either between the flange or added a second bushing and placed both of the below? I would think adding a second bushing and placing them lower would add stability and more range of motion. Having them offset seems odd to me. Any thoughts?
96 400 2 stroke
won't pull forward. acts like something is stuck. engine won't rev up. worked fine when stored 6 mos. ago.
Anyone paint bars and beadlock wheels?
I am picking up a 2019 Renegade XMR 1000, it’s in black and yellow. I am thinking of painting all the yellow accents in black. Wondering if anyone has done this before. Thanks!!
New side by side owner
New to sxs have ridden motorcycles, quads, snowmobiles all my life. I’m old and broken so sold the Harley Electra Glide and bought a 2013 1000 xt commander, looking to have fun in Quartzsite in the winter and Oregon and Washington in summers.
Holding crank on stator side Primary clutch removal?
Hello everyone,
I have been doing some work on clutches and had installed a cvtech on a buddys 850. I have the clutch removal tool and it was a huge pain getting it off with the correct tool. Once we got it off I was trying to figure out how to hold the new clutch without the new cvtech tool. What I did was removed the plastic 14mm allen bolt from the stator cover and used the allen socket to hold the crank... it is also 14mm. I torqued the new clutch down without issue. Now I have two more clutches to do and and asking is it OK to use this method when taking a primary clutch off? Any issues or possible problems, it seems to be a very easy way of doing these jobs. Any ideas? the picture is a generic photo of a cover so people know what bolt I am talking about on the stator cover, it is plastic.
I have been doing some work on clutches and had installed a cvtech on a buddys 850. I have the clutch removal tool and it was a huge pain getting it off with the correct tool. Once we got it off I was trying to figure out how to hold the new clutch without the new cvtech tool. What I did was removed the plastic 14mm allen bolt from the stator cover and used the allen socket to hold the crank... it is also 14mm. I torqued the new clutch down without issue. Now I have two more clutches to do and and asking is it OK to use this method when taking a primary clutch off? Any issues or possible problems, it seems to be a very easy way of doing these jobs. Any ideas? the picture is a generic photo of a cover so people know what bolt I am talking about on the stator cover, it is plastic.
ISO 2004 sportsman 700 crank.
I am looking for a good used 04 sportsman 700 crankshaft.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Kolpin Cabelas plow on 2015 450 L
Hi All, I purchased a Kolpin universal plow from Cabelas the other day and come to find out, the 2015 Outlander 450L is not on the list of ATVs it fits. It seems to fit almost every other model and even the 450L of different years. Anyone tried to mount the Kolpin universal plow blade to a 2015 Outander L 450? I'd like to know if it's a minor issue of modification before I return it or buy a second ATV for plowing. thanks for any replies.
carb leaking
ok today i started my trailblazer and rode around quick them put her away came out an hour later and there was a puddle of gas under the machine and i have fuel leaking from my fuel bowel over flow/vent line thing from there so i turned my fuel off and it stops but when i turn the fuel on it leaks and i dont know whats wrong with it please help!?!?!