Hi I have a 2009 Can Am renegade 800 I washed it couple months ago I tried starting it yesterday and no power no power going to the dash no lights brand new battery I checked most of the connections I check the fuse box all the fuses are good running back at least the three that I know of in the back I checked the relays and looks like there's no power going to the main relay I wonder if there's any fuses between the battery and the fuse box if anybody got any idea please help
Changing transmission fluid in 1997 sportsman 400 4×4
I just bout my first atv and very new to small motor maintenance and repair.I noticed some watter got into the transmission from the breather valve located above the dipstick because it dosent have any housing on it. Can anybody tell me how to do this myself? I downloaded the manual and it's pretty vague on the subject and cant seem to find a youtube video to help either. Need help locating the full plug and drain plug. Or can I fill directly from the hole the dipstick goes in? Going to the polaris dealership in the morning for fluid. Any help would be much appreciated thank you.
Changing transmission fluid in 1997 sportsman 400 4×4
I just bout my first atv and very new to small motor maintenance and repair.I noticed some watter got into the transmission from the breather valve located above the dipstick because it dosent have any housing on it. Can anybody tell me how to do this myself? I downloaded the manual and it's pretty vague on the subject and cant seem to find a youtube video to help either. Need help locating the full plug and drain plug. Or can I fill directly from the hole the dipstick goes in? Going to the polaris dealership in the morning for fluid. Any help would be much appreciated thank you.
07 sportsman 700 rear , upper A arm bushings
Cant get the bolts #37 out of the back of the upper A arm due to the rear differential. I'm assuming that I need to remove the rear deferential bolts and shift it over to allow the upper A arm bolts to clear?
07 sportsman 700 rear , upper A arm bushings
Cant get the bolts #37 out of the back of the upper A arm due to the rear differential. I'm assuming that I need to remove the rear deferential bolts and shift it over to allow the upper A arm bolts to clear?
How’d you mount your rear seat/cargo box?
I'm wanting to install a rear seat/cargo box. However, due to the Polaris Sportsman flat rack with holes, it's looking a little tricky for me. Besides using u-bolts does anyone have ideas how to do this? I saw some plugs that expand when you screw them in on Amazon but the reviews say they don't really hold well and a seat could be dislodged.
Thank you for any advice or links!
Thank you for any advice or links!
2007 ranger 700 no fire
I have a 2007 polaris ranger 700 . I have replaced the spark plugs , coils ,& the ecm underneath the drivers seat & there is no fire . It is not showing any codes . If any one can help , I would really appreciate it . Thank You
OEM winch for Sportsman 400 HO
Looking for an OEM Polaris winch that will fit a 2010 Sportsman 400 HO. Part number would be greatly appreciated. Thanks
2016 renegade 1000 xmr, no lights
nolights working...no high beam or no low beam on my xmr.
key is in right place30 amp fuse is good in fuse box
what is the issue?
key is in right place30 amp fuse is good in fuse box
what is the issue?
2012 550 X2 Engine lunched.
Newbie here.
Just got back from a trip to camp. My engine is trashed....hole in the block the size of a softball, starter torn out, connecting rod busted. The left side balance shaft came through the case and hit me on the inside of my left leg and landed on the running board, along with part of the case with the dipstick still attached. Not hurt. I will attach pics soon. I am just starting to dissect this to determine the cause of this failure, still too early to tell.
Anyone else have this type of MAJOR engine failure?
Just got back from a trip to camp. My engine is trashed....hole in the block the size of a softball, starter torn out, connecting rod busted. The left side balance shaft came through the case and hit me on the inside of my left leg and landed on the running board, along with part of the case with the dipstick still attached. Not hurt. I will attach pics soon. I am just starting to dissect this to determine the cause of this failure, still too early to tell.
Anyone else have this type of MAJOR engine failure?