I have a 2000 Polaris Xplorer 250 vin number 4xaag25c0y2152978. I recently changed the 2-cycle engine oil to yamalube, since then every time I start the quad a lot of white smoke fills the air. It lost power and the smoking does not stop. It may be coincidence or not. Who can tell me what is wrong with her. Should I change the oil? what is the best 2 cycle oil for Polaris? Is there a problem with the carburetor? Please someone help me. I want to use my quad and I can't, Thanks.
Throttle issue Polaris 500 HO 2008
Hello,
I have a 2008 Polaris 500 HO that throttles up whenever I turn to the left or to the right. When I straighten out the handle bars, the throttle goes back to normal.
I tried swapped out the throttle cable, but the original moves easily and replacing it didn't fix the issue. My guess is that I have not routed the cable properly, but I just cannot find the right route. It isn't related to the choke cable, as I can grab that one and move it all over without the rpms changing.
If anyone would be able to give me a description, or even better, pictures of the throttle cable routing for my quad or one with the same routing design, I'd greatly appreciate it.
Thank you.
I have a 2008 Polaris 500 HO that throttles up whenever I turn to the left or to the right. When I straighten out the handle bars, the throttle goes back to normal.
I tried swapped out the throttle cable, but the original moves easily and replacing it didn't fix the issue. My guess is that I have not routed the cable properly, but I just cannot find the right route. It isn't related to the choke cable, as I can grab that one and move it all over without the rpms changing.
If anyone would be able to give me a description, or even better, pictures of the throttle cable routing for my quad or one with the same routing design, I'd greatly appreciate it.
Thank you.
02 700 Hard to warm up and crackles/pops when reved
When I first start the bike it wants to die even with the choke on and takes over 5 min to warm up enough to stay idling. If I rev the engine I also get a crackling popping sound from the exhaust, not a smooth rpm let down. same if I'm riding and let off the throttle it sounds like crap. I know I have to replace the donut exhaust gasket since it's getting louder from the front exhaust connection. Could it be from the exhaust or do I need a carb clean and rebuild? any thoughts? and thank you in advance for tips.
Kimpex Click-n-Go 2 Plow System
Been thinking about getting a plow installed for this winter and was leaning towards this Kimpex plow setup...Can anyone who has this system installed give me some feedback on there experience with it....Build quality, design flaws etc.:smile
Installed BRP yoshimura slip on exhaust
Hey guys,
I just finished installing the Brp Yoshi exhaust.
My question is, how hot does the muffler tip get? It’s seems pretty close to the regulator even with the regulator relocation bracket.
Should I be concerned?
The instructions are so difficult to follow so I had to “wing it”!
Also don’t have a fuel controller or tuner. We’ll see how it is without it for now.
Just started it up and idle for a few seconds, this Yoshi is much loader than stock and has a deep rumble....love it!
I just finished installing the Brp Yoshi exhaust.
My question is, how hot does the muffler tip get? It’s seems pretty close to the regulator even with the regulator relocation bracket.
Should I be concerned?
The instructions are so difficult to follow so I had to “wing it”!
Also don’t have a fuel controller or tuner. We’ll see how it is without it for now.
Just started it up and idle for a few seconds, this Yoshi is much loader than stock and has a deep rumble....love it!
2011 650 xt w/27″xtrs on 14″ 212s
So, I just put these wheels and tires on. I had the same on my 09 500 and ran the dalton kit. The 09 was totalled a few years ago when I was hit by a car. I replaced it with the 11 but left the stock wheels and tires on it until now. I liked the way the 09 worked with the dalton kit but my uses have changed since I totalled it. Basically just use it for hunting which requires running through some mud holes and trail riding. Other then that I push race cars on and off the track and putt around the pits. Would the dalton kit for the 650 work alright for my riding habits or is there something else I should look at?
The stock set up seems to smoke belts just for fun with the stock wheels and tires. Tried stock, Dayco, and Gates. The Gates seems to hold up a bit better.
Just looking for something thats going to give a more solid riding experience. Cant do much about smoking belts when im pushing cars around.
The stock set up seems to smoke belts just for fun with the stock wheels and tires. Tried stock, Dayco, and Gates. The Gates seems to hold up a bit better.
Just looking for something thats going to give a more solid riding experience. Cant do much about smoking belts when im pushing cars around.
New ATV Owner.
Hi
New to the forum riding a 2019 Can am Outlander XTP Max 1000.
Moved to an acreage in the Edmonton Alberta area a while ago and decided that the atv would be more practical around our land than the 2017 Maverick DS side x side we had.
Hopefully able to gain useful information from this forum anyways hi to everyone.
New to the forum riding a 2019 Can am Outlander XTP Max 1000.
Moved to an acreage in the Edmonton Alberta area a while ago and decided that the atv would be more practical around our land than the 2017 Maverick DS side x side we had.
Hopefully able to gain useful information from this forum anyways hi to everyone.
Help this is all my guage will say?
Hi i have already posted but got no replies but i could be reading it wrong. I JUST got a 2003 Polaris sportsman 400 and this id all the spprdometer/guage will do..look at pic?? I dont even know where to start. Does it need maybe some sort of relay?? My yellow button wont even change the screen??
Service Manual – 04/05 Outlander 400
Hello everyone! I am in desperate need of the service manual for my 400.I found 2 loose wires hanging by the engine and can't figure out where they should go. I also want to do some other work. All the manuals online are just redirects - can't actually find a legit link. Any help is greatly appreciated. Thanks!!!
Looking for new bike
I'm in the market for a new quad(mine blew up)This will be my 10th ,New ,Polaris.
When I started I wanted a 850 SP matt titanium. Same as what I have. But now Im looking at Titanium 850 sp. 1000 copper,1000 touring
They have them but hate what they did to the storage box's (front and back)? The fronts to small(compared to the 2015) And the back trunk is gonna be useless when a bag or box goes on the rack. Has anyone found or made a rear storage bag for these so its not to much of a PITA to get to the trunk?
Whats the deal with those big air scoops they have on the engine mud guards ,under both front fenders(to help cool the engine I assume)?That looks like a great big MUD TRAP and a PITA to clean.Was that on the 16-17's also. Any issues?
They are now using CLEAR coolant??WHY? Is there something better about it? Or are they trying to get people to buy their coolant like the other fluids? Seems it would be a PITA checking level when its dirty.
Is the exhaust on the 18 the same as the 17 ? Any issues?
I found out the touring 1000 has the same lights and the storage I like.
The lights matter because I have the HERETIC Studios LED's and would love to keep them. Besides a 4" longer wheelbase I see its Around 3 inches longer but what gets me is How is it 8" higher (pretty sure that what I was reading)and has a 3" seat height difference then a 850 or 1000? Anyone know why? Does the touring have the upgraded pinion cover?
Any downsides besides tight trails?
When I started I wanted a 850 SP matt titanium. Same as what I have. But now Im looking at Titanium 850 sp. 1000 copper,1000 touring
They have them but hate what they did to the storage box's (front and back)? The fronts to small(compared to the 2015) And the back trunk is gonna be useless when a bag or box goes on the rack. Has anyone found or made a rear storage bag for these so its not to much of a PITA to get to the trunk?
Whats the deal with those big air scoops they have on the engine mud guards ,under both front fenders(to help cool the engine I assume)?That looks like a great big MUD TRAP and a PITA to clean.Was that on the 16-17's also. Any issues?
They are now using CLEAR coolant??WHY? Is there something better about it? Or are they trying to get people to buy their coolant like the other fluids? Seems it would be a PITA checking level when its dirty.
Is the exhaust on the 18 the same as the 17 ? Any issues?
I found out the touring 1000 has the same lights and the storage I like.
The lights matter because I have the HERETIC Studios LED's and would love to keep them. Besides a 4" longer wheelbase I see its Around 3 inches longer but what gets me is How is it 8" higher (pretty sure that what I was reading)and has a 3" seat height difference then a 850 or 1000? Anyone know why? Does the touring have the upgraded pinion cover?
Any downsides besides tight trails?