Posted on

1999 sportsman 335, I need a new cam

I'm looking for a cam. The bike was bogging out at full throttle. Rebuilt the carb now the bike wont go anywhere, no power. I was told I need a new cam shaft. Polaris discontinued the part. I been searching the web, No luck. If anyone has one or can point me in the right direction please email me. jeff.gimon78@gmail.com
Posted on

02 325 Magnum carb rebuild ?

2002 325 Mag. - I rebuilt my carb. with Moose kit 1003-0513 because I wasn’t getting enough gas or no gas to the carb. and everything else checked out. I also removed the screen/filters inside the gas tank and cleaned. Air filter & fuel pump is new.
2 things I noticed during disassembly were my air/fuel mixture screw didn’t have an o-ring or washer like what is in the kit. Also the main jet I removed said 120 and an “R” with a little square box next to it. The new main jet had 145 on it, which I installed. I also installed the new mixture screw with spring, o-ring and washer. I made sure to turn the original air/fuel mixture screw in before removing which was 2-1/2 turns.
When I fired it up it ran great, idled well, rev’d it a little and ran smooth but when I opened it up it makes a steady chatter noise like it isn’t getting enough gas or to much? So my question is – do you think the main jet is the wrong size from the kit ? Or your thoughts that might be causing the problem ?
Greatly appreciate any knowledge on this !
Posted on

’02 700 carb diaphragm spring

The spring on the diaphragm keeps popping out and lodging sideways when i pull the top cover off. I have checked the diaphragm for holes and could not find any. The atv will not hardly run when this happens. I have repaired it twice. Any ide why this would happen? Everything is clean and in good condition.
Posted on

Intro

Hey all just thought I'd introduce myself, been on here a few weeks chasing advice.

I've come off an old 04 honda foreman 450 and must say I'll never look back!

We do mostly winching tracks, big climbs and mud holes.

09 800 Outy
26 x 11 x 12
26 x 9 x 12 (6mm spacers)
Raised rad and cvt snorkles in one unit
Warn winch with new synthetic rope
Led light bar
Folded some 3mm ally at work for front cv guards
And that's all so far.


Sent from my SM-G930T using Tapatalk
Posted on

New member

Hello I just recently purchased a 96 300 xplorer 4x4 and was wondering if anyone can tell me where to find any after market rims ?
Posted on

550 Sportsman with 28” Anclas

Anyone ever run 28 Anclas on their 550 ? I’m currently running 27s on the stock 14” rims without issue. Just wondering before I buy them. Have a smoking deal lined up on a brand new set of 28s.