I am new to the Can-am scene and I have a 650 6x6 that so far I really love. I've only got a few hundred miles on it and am hoping for some help with a noise that I don't know if it is normal or something I need to look into. When in 6x6 there is a noise that sounds kind of like a tire noise or like there is a stick rubbing on the tread of a tire. Kind of hard to describe. It's not super loud and the faster you go the louder it is, like 10-15 mph. When i switch back into 4x4 mode, which also takes quite a while to go back into 4x mode, the noise goes away. Is this a normal noise? If not, any ideas?
reverse
i have a2001 explorer it runs fine in forward but bogs down when try to back up
idle issues 02 trailboss 325
Hey guys, So my 02 Polaris trailboss 325 has some issues with idle. Its kind of a pain to get started on colder days even with the choke out. but when it starts it idles but then will die and its easy to start after that I just have to babysit it til its warm then it idles fine. The main problem is after riding it for quite sometime and its hot it idles really high. it idles high enough its hard to get into gear and really grinds when it goes into gear. So when it gets hot I reach under (and try not to burn the living hell out of my hand) and adjust the idle screw and then its fine. But when it sits for quite sometime and gets cool again the idle is too low. Any ideas for the new guy?
2007 Polaris sportsman Issue
OK getting desperate here..... 2007 polaris sportsman 500 efi........ starts fine cold....... after riding a bit will stall out when you let off the throttle and have trouble starting after riding for an hour...... cranks fine just wont turn over or idle unless I sit o the throttle....... flashes codes 22,41,46,56,58......and just starting to flash the Battery icon. changed the fuel filter and cleaned up the map sensor and battery has plenty of juice ....... sometimes after it's warm it will stall out and backfire after i get it started. any ideas?
new headlight problems
hey guys I have 2002 sportsman 500 ho. I bought some led 4inch pods and would like to install them as new headlights but I ran into a problem my pods have a 2 wires 1 negative and 1 positive while my headlight harness as 3 wires 1 negative and 2 positive wires for my high/low is there anyway I can hook my new pods up to both high/low or just one or the other
Wes industries 2up installation
Hello. Do you have to remove back plastic that rear rack mounts to to
Install ubolts to mount two up on machine? Is there any tricks anyone has to install 2up seat onto machine?
Install ubolts to mount two up on machine? Is there any tricks anyone has to install 2up seat onto machine?
Weird noise
Tire Size Help
Lookiing at a set of Dirt Commanders in 27" on 14" rim. Will they fit my 2014 570?
Carb Swap
Hello everyone,
I have a 2006 Outlander 400 HO 4x4. The machine would idle but as soon as you gave it gas it would die. I pulled the carb off and it was a MESS. I searched e-bay and found a carb for $45 and ordered it. While the carb looked the same the carb I ordered was actually a carb for a 2006 MAX. The only difference I can see is that the throttle cable is threaded on my bike where as the new one is different, on the new carb the inlet is wedged in with threads external to the carb.
Questions:
Could a solution be to order a new throttle cable from a 06 MAX and install it on my 06 non MAX?
Should I send the carb back or could it potentially work? A rebuilt kit is the same price I paid for this carb, perhaps I can use the parts and rebuild my carb? I can t find a new carb for a 2006 HO 4x4 that is NOT a MAX.
Are the jets and other carb settings the same between the a MAX and non MAX?
Thanks all
Trent - trentshn@hotmail.com
I have a 2006 Outlander 400 HO 4x4. The machine would idle but as soon as you gave it gas it would die. I pulled the carb off and it was a MESS. I searched e-bay and found a carb for $45 and ordered it. While the carb looked the same the carb I ordered was actually a carb for a 2006 MAX. The only difference I can see is that the throttle cable is threaded on my bike where as the new one is different, on the new carb the inlet is wedged in with threads external to the carb.
Questions:
Could a solution be to order a new throttle cable from a 06 MAX and install it on my 06 non MAX?
Should I send the carb back or could it potentially work? A rebuilt kit is the same price I paid for this carb, perhaps I can use the parts and rebuild my carb? I can t find a new carb for a 2006 HO 4x4 that is NOT a MAX.
Are the jets and other carb settings the same between the a MAX and non MAX?
Thanks all
Trent - trentshn@hotmail.com
Carb Swap
Hello everyone,
I have a 2006 Outlander 400 HO 4x4. The machine would idle but as soon as you gave it gas it would die. I pulled the carb off and it was a MESS. I searched e-bay and found a carb for $45 and ordered it. While the carb looked the same the carb I ordered was actually a carb for a 2006 MAX. The only difference I can see is that the throttle cable is threaded on my bike where as the new one is different, on the new carb the inlet is wedged in with threads external to the carb.
Questions:
Could a solution be to order a new throttle cable from a 06 MAX and install it on my 06 non MAX?
Should I send the carb back or could it potentially work? A rebuilt kit is the same price I paid for this carb, perhaps I can use the parts and rebuild my carb? I can t find a new carb for a 2006 HO 4x4 that is NOT a MAX.
Are the jets and other carb settings the same between the a MAX and non MAX?
Thanks all
Trent - trentshn@hotmail.com
I have a 2006 Outlander 400 HO 4x4. The machine would idle but as soon as you gave it gas it would die. I pulled the carb off and it was a MESS. I searched e-bay and found a carb for $45 and ordered it. While the carb looked the same the carb I ordered was actually a carb for a 2006 MAX. The only difference I can see is that the throttle cable is threaded on my bike where as the new one is different, on the new carb the inlet is wedged in with threads external to the carb.
Questions:
Could a solution be to order a new throttle cable from a 06 MAX and install it on my 06 non MAX?
Should I send the carb back or could it potentially work? A rebuilt kit is the same price I paid for this carb, perhaps I can use the parts and rebuild my carb? I can t find a new carb for a 2006 HO 4x4 that is NOT a MAX.
Are the jets and other carb settings the same between the a MAX and non MAX?
Thanks all
Trent - trentshn@hotmail.com