Category: Forum News

My Polaris 335 won't start and when i try to start fuel is coming out of the overflow. Could it be a clogged fuel filter or do i need to pull the carb and clean it?

Thanks in advance for any advice.

Hello I just join .I am new to the canam I have a 2017 0utlander xmr 850

I've had the Pure Polaris hand and thumb warmers on other machines and really like how well they work and the factory appearance of the switches.

Searching for these now, brings up part number 2877363 and the switch shown in the picture is white and round. The switch that has been included in the past is rectangular to fit the factory molded in cutout locations.

I have not yet removed the pod cover from my '18 but from the outside, it appears the factory cutouts are there for the rectangular switches.

**Is there a different part number for the kit with the rectangular switch?


This is what shows up on the Polaris website:
Attachment 112381


Here is what I've purchased in the past:
Attachment 112383

Attached Thumbnails

   

Hi
The wiring harness for my 2006 Polaris Outlaw 500 is junk. My question is, is there any other wiring harness from any other atv that will fit this? If so,could you tell me which kind? I am not very good at the whole cross reference thing. Or does it have to be from a 2006 Polaris Outlaw 500 only? Also,does anyone happen to have 1 they would sell me cheap? I have looked on ebay,but only found some with cut wires and others with plugs missing. I do not have the money to buy a new one or i would.
Thanks

Just purchased a 2018 570 sportsman eps for hunting in swamp area. Hopping to learn if I can put 28" Mega Mayhem tires on, if so 12" or 14" wheels, what offset and wheel.
Has anyone done this ?

just purchased a 2018 570 eps for hunting in extreem mud. Looking to learn if I can use 28" megs Mayhem tires and 12 or 14" wheels if so how to get the right offset

Had to extract this Razor from a narrow trail after he clipped a rock and blew out his rack and pinion. Of course I was volunteered since my quad was the oldest. We had to attach another quad to the front of mine to get up one of the steeper sections of trail, but the operation was a success.


I've been on three rides with this guy. The first time was the Razor's maiden voyage, he blew out a front shock. Second time he blew out a sidewall on one of the stick tires. And now this.

Attached Images

File Type: jpg

20180905_162051.jpg (722.6 KB)

5100 miles on my 2013 LE, mostly stock setup, but new Bearclaws at around 3000 mi. Last few months I feel a binding vibration that comes and goes, only when the quad moves. I think it feels like a cv or u-joint binding, happens on flat or over terrain.

I’ve already replaced the front u-joint a while ago and the current one feels tight. Rear has a little play in it, but doesn’t feel terrible. I have no idea how to check the CV joints.

Thoughts? Ideas?

Hey everyone while re-locating my rad the fan wires pulled out of the plug on the bike end

The bike has a black and black trace

And the fan has a black trace and a blue

Does anyone know what way round they go?

Thanks for any help

And here's a few pics of my rad relocation and cvt snorkle in one unit.

Sent from my SM-G930T using Tapatalk

Was quite a hot day today, 27c, and I gave the quad quite a hard ride for more than an hour. All was fine with the engine.

Stopped to adjust shocks, tried to start, nothing. Pressing the button does nothing, like when it's in H gear and brake isn't pressed.
No starter click, sound, nothing.
Sometimes hear the quad "resetting", like it does when you turn the key, trrrrrrrr, k-k-k-k-k-k. But the display doesn't actually reset.
Took 20 min or so, and it eventually just worked when I pressed the button and the started worked and it started right away and ran fine.

Drove pretty hard to get home quick, like another 10 minutes of perfectly fine engine, and it just lost all power and died. Wouldn't start again.
Now, at that point I tried a few things, like opening the gas cap (and there was pressure or vaccum, I can't tell, but there was quite a bit. So did it die because of an improper vent, and is that unrelated to the no-start issue? I don't know). But because it was hot, it did the same thing as 1st time and wouldn't start.
Funny thing, if I let the display turn off, and tried to start it just as it "turned on", the engine started fine for 1 second but as the display was done resetting, engine died.
Eventually, it just (I think?) cooled, and it just started again no issues, and I was able to drive to my trailer with no issues. Once in the trailer, I tried to start it again hot, wouldn't start.... once home, started right away.

Doesn't feel like there is any strain on the starter or engine, when it starts, it starts right away, and when it won't start, it does nothing.

Battery is new and good voltage, connections are tight, fuel is new, gear doesn't help (P, N, H, R, L)

Any ideas why it would refuse to start hot? Do you think that it died for the same reason, or it's the fuel pressure? (clogged vent valve?)
Only 700km on the quad, never flooded, engine turns and starts fine all the time, doesn't feel like there is ever any strain on it.... feels like an electical/electronic issue to me.

Ideas of a fix?