Category: Forum News

so any one here know were the fuses are?
i have no lights back or front have dash lights they all work
also any know why this bike has to relays on top of frame under seat Attachment 112365
i have placed a pic of it i hope
:eek

Attached Thumbnails

 

I WANT TO BUY AFTER MARKET EXHAUST FOR 2018 850 SP.
Also an exhaust for 2017 570 sp.

Want to buy ultimate series windshield and fairing med/tall height for 2018 850 sp

Just curious . There are 3 Connectors not being used under the headlight assembly. My upper light wasn't working, thought it was a bulb but after further investigation the 2 wire were broke off in the wiring harness. While I was fixing it I noticed there were 3 different connectors that didn't Connectors to anything, was wondering what they are for.

Attached Thumbnails

     

Whats everyone use for a bar end mirror?

I just purchased a 1997 Polaris explorer 400 4x4 2 stroke. It seems to be smoking really bad. Like enough that you want to keep it moving as not to choke on the fumes. Is this just a dirty fuels system or carb problem? Or could it be a piston and rings?

Help can someone help me i need
2004 Polaris Magnum 330 Service Manual
I'm 2 times already ordered online The first order was charged but never arrived
and the next one was on a cd that did not work
where I live in Iceland and have to wait longer to receive shipments here
I try to ask you for help and who knows maybe there's someone out there that can help Icelanders with a problem

Attached Thumbnails

 

Does anyone know of an alternative to the $150 one way bearing for the 2010 sportsman 550 drive clutch? 1322809
Or will the 2011 and up bearing fit? 1521667 1521172
Or will the 2011 primary clutch work properly on the 2010-2009? 1322953
I see the price on the 2011 and up primary one way bearing is only around $40
Please help need to get this thing going.
Ideally I think I would put on a 2011 and up primary and then all maintenance costs would be lower in the future. If it will work properly.

I have a 2015 1000r outlander . I recently rebuilt the motor ran fine for a week . Back fired and lost compression in rear pistion. Took apart ring was cracked figure I set gap to tight. Order new rings went ahead rebuilt both cylinders front good compression rear 66 pounds . Why would I be losing in the rear ?

White Lightning XP1000 eps with low hours and around 300 miles on it. Everything is in working order with no issues. Has a QSC clutch kit, aftermarket wheels/tires, winch with synthetic rope, grip and thumb throttle heater and title in hand. Asking $8500 OBO

Pictures available upon request