Category: Forum News

2017 Sportsman 570

Check engine light came on for a few seconds, then went away .


The display said "chk eng" or something to that matter..


How do I get the code ?

I have a 04 scrambler. 4x4 and RWD. it has a winch in the front. Ive tried all types of ways to wheelie it and nothing works. Can i wheelie a scrambler or what the heck. Ive put my left foot on the rear rack, ive pushed my body back. Ive pressed the brake while revving it. Any tips?

I just puchase a new 2016 scrambler 1000. Yes its a new left over. After my second ride i noticed the grease running out of the rear a arms by the rear end housing(see picture). The housing was warm but not hot after a 100 mile ride. Should i regrease it now with high temp grease?

Sent from my SM-G950U using Tapatalk

Looking for a glacier 1 plow mount for a 07 sportsman 800 .. thank you

Looking for all the stock a-arms for a 2104 sportsman 850XP. Can be contacted by email or text. mustangman1990@yahoo.com 501-230-6634


Thanks

I have message that pops up on my display that says brake. I lose power at about 4500 RPMs, or 26-20 mph. I have read in places that it could be a break light. Both light stay on when the machine is in the on position. I had this problem once last year. I took it to the shop and they fixed the problem. That being said I forgot what they told me the problem was... Any help would he muchly appreciated

2016 Outlander

i have a 2016 570 ,i need to replace the speedometer. it has a needle to show the kph.but the rest of the info is on the little display at the bottom.if i get a used one ,will it show my atv's mileage. or the one in came off of.

So I just purchased a used 2002 sportsman 400 that only starts with pull start. The starter would engage when I used a screw driver to jump the solenoid terminals. The speedometer did not work when I bought it but the neutral light lit up. But I took the Speedometer unit off to paint it and when I plug it back in the neutral light doesn’t work any more either. I bought a new battery and a new solenoid and installed them but when I turned the key I still got nothing but again when I jumped the terminals on the new solenoid the starter engauged again. So now I’m left wondering if I don’t even need the bed solenoid and my problem is something else. I’m assuming something along the lines of the solenoid isn’t being told to work when I turn the key. There is a lot of wires that look like they used to be hooked up but I got no idea what they were for or where they went.

I'm not sure how many forum members are using a UTV in the desert, but if you are, take a look at BFG's Baja TA KR2 tires. I just put a set of BFG Baja TA's on my Maverick X3 based on the recommendation of the owner of our local Textron dealership. They just happen to sponsor the winner of this years Vegas to Reno desert race as well.

I had been looking at tires for a while, and had been considering these tires anyway, but after talking with the local shop, I decided to take their recommendation. I've ridden ATVs and UTVs for decades, and have tried countless different tires from most of the major brands. These are the best tires I've ever used for desert roads, where dry conditions, gravel, and rocks are common. In fact, nothing else even comes close. Their straight line tracking, smoothness, and lateral grip on tractionless gravel turns is nothing short of phenomenal. They come in the 32x9.50R-15 size I am using, and a smaller 30" size if you don't quite want to run 32s on your UTV.

Hi guys.

I'm new to Can-Am's and ATV's.

I got my self a 2014 Can-Am Outlander, and I need tracks for the winter.

There is a guy, some miles away that is selling Tatous 4S, that he have been using on his Can-Am 800 2008.

Does the brackets that he was using, fit mine?
He had a G1, and I've got G2. Will it fit?

Thanks!