What do I need to know about changing tire size to add lift to my Maverick Trail? Would a 14” wheel and 28” tires cause problems? Would I need to have the clutch adjusted for the larger diameter tire?
Thanks
Thanks
Got sand!
Post your paddle set ups. Needing info for renegade 800-1000cc sand tire set ups. Size/paddles/wheels.
Ds650 leak down test!!
Anyone done a leak down test on a DS before? Tips tricks, doo's donts?
500 HO compression release valve
Hey all!
My 500 turns over like a bear! I did the top and bottom of he motor a while ago and it's always kinda pulled over hard. The starter doesn't have the balls to turn it over, one or two pulls ( which could rip your arm off) and it fires up and runs great. Can I take the compression release valve out with worrying about the little ball on cam shaft falling ?
My 500 turns over like a bear! I did the top and bottom of he motor a while ago and it's always kinda pulled over hard. The starter doesn't have the balls to turn it over, one or two pulls ( which could rip your arm off) and it fires up and runs great. Can I take the compression release valve out with worrying about the little ball on cam shaft falling ?
Exhaust stud Torque
What torque does a 2018 renegade 1000 XMR exhaust stud need, Also do i need any blue locktite on it ? Thank you
2006 50cc
Heyy out there. I'm new here and in desperate need of assistance with my sons 2006 predator 50cc. I went to change the gearbox oil and I noticed through the sight window that it's all pink. Can I drain it and start over with fresh fluid any help with this issue is appreciated.
2001 sportsman 500ho 4wd
does anyone know what this junction valve is? left side of machine, in the picture the two hoses to the left are fine. i need the hose to the far right that still has the factory clamp on it. not a great picture, sorry. hose must be seeping oil, it goes from here up to a white plastic valve that looks almost like an inline fuel filter but isn't. need to get one, no idea what to call it. it was probably a molded hose and is now too rubbery from being oil soaked.thanks for any help. i circled the hose i need, can get better pic if need be.
2001 sportsman 500ho 4wd
does anyone know what this junction valve is? left side of machine, in the picture the two hoses to the left are fine. i need the hose to the far right that still has the factory clamp on it. not a great picture, sorry. hose must be seeping oil, it goes from here up to a white plastic valve that looks almost like an inline fuel filter but isn't. need to get one, no idea what to call it. it was probably a molded hose and is now too rubbery from being oil soaked.thanks for any help. i circled the hose i need, can get better pic if need be.
300 hard to start
1999 300 Polaris xpress, air cooled.hard to start.will almost drain battery,but when it does start it runs fine.had carb to 2 different shops and was rebuilt.thinking of using starting fluid to get it starter instead of draining battery so bad.thanks any ideals thanks freinds
2017 570SP backlight
My blue backlight on my sportsman display stopped working this weekend. I was able to switch over to red, but now I need to fix the blue backlight. Searches of this forum are not returning much helpful info, as almost all of the threads deal with the entire speedo pod not working in some way.
I assume, because the speedo pod works just fine, that this is just the blue bulb/diode that gave up and not a fuse or wire issue. Any advice or direction from the crew on this?
Thanks as always for the help, over the years you all have saved my bacon a few times. Hoping this is another one of those times!!
I assume, because the speedo pod works just fine, that this is just the blue bulb/diode that gave up and not a fuse or wire issue. Any advice or direction from the crew on this?
Thanks as always for the help, over the years you all have saved my bacon a few times. Hoping this is another one of those times!!