Category: Forum News

I've read thru a few threads on no start conditions but haven't seen one that reflects my problem exactly.
Ran the quad a few days ago...ran great. went to start it yesterday and nothing. Acted like a dead battery. Tried to jump it..no deal. Checked voltage had 12.9 at the battery. Took the battery out and put it on an auto charger. It turned off, showing full charge after less than a minute. Re-installed the battery. Tried to pull start it but got nothing there also. Checked voltage from the battery to the relay? in line between the battery and solenoid and have power on both sides and to the solenoid. Still have no power to anything. Instruments, winch, headlights are all dead.
From what I've seen on You Tube looks kinda like an ECM issue but it got dark so couldn't check voltage there or the ignition.
Thanks in advance for any ideas.

I've read thru a few threads on no start conditions but haven't seen one that reflects my problem exactly.
Ran the quad a few days ago...ran great. went to start it yesterday and nothing. Acted like a dead battery. Tried to jump it..no deal. Checked voltage had 12.9 at the battery. Took the battery out and put it on an auto charger. It turned off, showing full charge after less than a minute. Re-installed the battery. Tried to pull start it but got nothing there also. Checked voltage from the battery to the relay? in line between the battery and solenoid and have power on both sides and to the solenoid. Still have no power to anything. Instruments, winch, headlights are all dead.
From what I've seen on You Tube looks kinda like an ECM issue but it got dark so couldn't check voltage there or the ignition.
Thanks in advance for any ideas.

2017 Polaris Highlifter 1000. when turning the key the first time the solenoid clicks on starter but the starter does not turn over, turning the key on and off a couple of times gets it to work properly and start. Will be replacing the starter since I'm going on a long trip to make sure. This is my second sportsman with a starter issue on a newer bike (2015 Sportsman 850) anyone else have issues with starters? luckily I found a starter online that is substantially cheaper then the one made of gold by Polaris :|

I have a 2011 xmr with the built in air compressor. Im pretty sure its available on some of the 2011-2017 models too.


Does anyone know if the actual hose end fitting is universal? I do not own a canam hose so have never actually used it. I wondered if I could buy any hose with a quick coupling on?


Something similar to this

https://uk.rs-online.com/web/p/pneum...lings/0497817/


Or is it a canam specific fitting so I cannot buy just any hose?

My name's Cory and I own a 2018 Outlander XMR 850 and a 2017 Renegade XMR 570. I live in NC and mainly ride at ATV parks like Outback, Busco, and Cape Fear. I do all my own work on my machines. I joined this forum in hopes of adding to my limited knowledge base of rotax motors and can ams in general. Hope I can help as well.

I have a 2003 Traxter 500 which has developed a severe oil leak at the weep hole of the pull start housing. I'm guessing it blew an oil seal at the crankshaft but have not pulled it down yet. Has anyone had this problem before? I would like to get the parts ordered and delivered before tearing it down.

From the schematics that I have seen it is difficult to determine what the part number is so was wondering if someone could forward the part number and what gaskets are needed to reassemble and where to buy them? I have the Bombardier 2002 Shop Manual (704 100 013) but it does not have a schematic nor a procedure for replacing the oil seal. Is there a better one available some where?

Thanks in advance for your help
norm

Hello,
Glad to be a new member to the forum,
I Own a Commander XT 1000
I live in VT and do most of my riding in New Hampshire, The trail system is very poor in VT so its well worth the trip to NH.
Hope I can be helpful here

I'm new to the forum; I've read several over the years but have never joined or posted to one before.
Bought a 2005 Sportsman 500 HO a few months back and have enjoyed it so we bought a new Sportsman 570 EPS for the wife last week.
Hope to learn a few new maintenance tricks and maybe help with a question or two.

Just purchased 2015 outlander xmr the front shocks were gone when i purchased it. I replaced them with the oem shock and now the bike hits hard on both extension and retard is this normal for this model??and if so does anybody have a fix.any help would be awesome thx.

My outlander blew a timing chain so I replaced both chain, guides and 4 valves. changed oil and drove about 60 miles and lost power and bottom of motor started to knock. But yet it idles great with no engine noise and no engine light on. Any ideas?