Category: Forum News

I have a 1995 scrambler 400 4x4. It is overheating according to the temp lite, I have been checking around for a fan thermal sensor and the cheapest I can find one of these is a $110. Is there a way to test this or can I use one from a different year or just bypass it and put a manual switch on it. Thanks Newbie

So this machine is new to me and I am going through it changing fluids - dielectric greasing every connection , changing the belt but for the life of me I cant find the damn spark plug !!!!! Help me please !

2006 Outlander that has a 2” trailer ball. Is anyone familiar with a 2” receiver i‘d like to be able to use.


Thanks

2006 model starts right up and idles fine, can rev up rpm in neutral and let off gas and idles down fine. It will sit and run no issues.
When I put in gear and accelerate it runs for about 2 seconds moving about 10 feet.....then Gauges loose power and it just dies immediately.
I have googled with no luck. Any ideas? New battery and visible connections seem fine. Thanks in advance!

Have a 2005 Sportsman 600 that I have questions about from time to time.

Got scrambler 500 2006
After one month siting i changed oils and variator belt. Today after 20mins on track crosing water, max 2ft deep and 15ft long. After water got back on track i drived about 100ft and then engine stoped. When the engine starts it runs, when accelerate it stops immediately.
What to look at? Is my engine broken?

I installed it,, but then I found a small mention in the instruction booklet that says if you are installing in a "non" XP, you have to contact your dealer for instructions. Mine is a 2017 Sportsman 850 "SP". What gives?? :sad It will spool IN, but switch is dead to spooling out!!

Do you think it to wide

Attached Images

File Type: jpg	5C4973FB-1B9F-4EB6-92AF-FCCEF2253DB2_1553971656685.jpg (890.2 KB)
File Type: jpg	77DA1857-1D1C-46D0-BC10-77B0B2618EF5_1553971697004.jpg (863.3 KB)

Hello, I took my outlander in to get a full service as it was due for one, and once I got it back I noticed some vibration in the handlebars/floorboard, and a bit in the seat. What are the potential causes of this? I took it back in and they said there was nothing wrong, but I don't ever remember it doing this before.

Any input would be great.

I have a 2000 xplorer 250, when I pulled off air box from carb I noticed one of the plug bb's laying in carb, question is which hole does it plug, can I use something else to plug hole and its purpose? thanks