[COLOR="magenta"]I have a 2006 Hawkeye but l cant find the specific model repair section here for it. Can someone help me?
Hi-temp/limp mode/coolant overflowing
Went riding this past Wednesday and my 2015 renegade 500 started to give me the hi-temp/limp mode home message. As well as coolant over flow. However I just replaced the coolant in February before going down to the Hatfield&McCoy trails and the thing ran fine down there for 3 days of straight riding. But now on a day trip of riding for maybe 4 hours it starts to overheat? Radiator is not clogged either. I haven’t heard the fan kick on either. Don’t know if that is why it is overheating.
I should add that this is my girlfriend bike and she is the only one that rides and but when it started over heating I was the one riding it and I was pushing the bike a lot harder than she does but I don’t think that’s why it started over heating. Plus she was riding it earlier in the day anyways. It just happened out of no where. I don’t see coolant leaking from anywhere other than the overflow hose either. Need help please!!
I should add that this is my girlfriend bike and she is the only one that rides and but when it started over heating I was the one riding it and I was pushing the bike a lot harder than she does but I don’t think that’s why it started over heating. Plus she was riding it earlier in the day anyways. It just happened out of no where. I don’t see coolant leaking from anywhere other than the overflow hose either. Need help please!!
Removing oil/gas section on 1986
Hi - just starting to rehab an old 1986 trail boss 250 I just picked up. I haven’t worked on Polaris atvs before and I’d like to take off the engine, clean carb, etc. I’ve removed most of the necessary outer parts and I’m left with the oil/gas section to remove. I got all the bolts off except the 2 in the front that are incredibly difficult to get to. However I am able to turn them and turn them and turn them. The section loosened up a lot but seems there is a nut underneath the section that I will need to hold to get these final 2 front bolts off.
I looked at the 1985-1999 service manual but it isn’t showing the same setup that I have. There are no “tabs” and the headlight is connected above the handlebar instead of this section I’m trying to remove.
Anyone know the trick to getting this section off?
I looked at the 1985-1999 service manual but it isn’t showing the same setup that I have. There are no “tabs” and the headlight is connected above the handlebar instead of this section I’m trying to remove.
Anyone know the trick to getting this section off?
Shocks inverted
Can the factory xt model shocks be mounted in an inverted position? As in shaft side down?
predator 90 oil to fuel ratio
Hi guys I'm a newbie to the forum and atv's I recently purchased 2 Polaris predator 90 a2004 and a 2006 from some one, I know they have oil injection pumps but the 2006 one he told me the oil pump was bypassed due to the pump went bad so I have to mix my oil with gas what I want to know what 2cycle is recommended and what ratio to use?
New renegade
Intermittent EPS loss??
Greetings friends..
My 2016 1000k has a loss of EPS at speeds over 30mph and usually during rough terrain. The illuminating idiot light and steering loss only lasts 2-3 seconds. I tried powering off all electronics nav,lights, etc. but no dice. I do have the oversized battery in the machine, from a polaris ranger.
In my searches I found many had a relay issue, dirty or loose.. my fuse box is dry n clean, prongs on relay look factory clean. Is there something that I’m overlooking here?
Thank you
Tags
My 2016 1000k has a loss of EPS at speeds over 30mph and usually during rough terrain. The illuminating idiot light and steering loss only lasts 2-3 seconds. I tried powering off all electronics nav,lights, etc. but no dice. I do have the oversized battery in the machine, from a polaris ranger.
In my searches I found many had a relay issue, dirty or loose.. my fuse box is dry n clean, prongs on relay look factory clean. Is there something that I’m overlooking here?
Thank you
Tags
Polaris models with filtered clutches?
Do any Polaris machines have filters on the air intake for the clutch housing?
I have a couple of 570 Sportsmans, and at just over 1k miles the primary and secondary clutches need rebuilt. The dealer said it's because of the dust. But they say it can't be filtered because of heat issues. But someone told me that Razors have filters?
And of course, all the failed parts are wearable items, so my extended warranties are worthless.
This is just a BS design flaw that they're blaming on the riders. They say I have to have it "serviced" more often than 500 miles. So, if thats true, I've concluded the Sportsman 570 is a straight piece of crap, and if Polaris knows this is a problem then they too, are pieces of crap.
I have a couple of 570 Sportsmans, and at just over 1k miles the primary and secondary clutches need rebuilt. The dealer said it's because of the dust. But they say it can't be filtered because of heat issues. But someone told me that Razors have filters?
And of course, all the failed parts are wearable items, so my extended warranties are worthless.
This is just a BS design flaw that they're blaming on the riders. They say I have to have it "serviced" more often than 500 miles. So, if thats true, I've concluded the Sportsman 570 is a straight piece of crap, and if Polaris knows this is a problem then they too, are pieces of crap.
1997 scrambler 500 will only start if connected to batt charger
i recently got the 97 scrambler 500 4x4 and it cranked and ran great for the first month then i had to replace starter and solenoid and i went to Polaris and purchased factory oils and gear lube and i did a service. now even though my batt has 12.6v it will only start if i connect the ac batt charger. then it runs fine until shut off. can anyone give me some suggestions on why that is?
Question regarding the 850 Touring
I am in the market for a 2 seater. I previously had an 05 Sportsman 500HO. Some things drove me away. EBC and single lever braking got me in trouble at times. I now have a newer Grizzly 700 SE. There's nothing I dislike about it, but I have a need to pack 2 up on occasion.
The Yamaha is dead nuts reliable and works very well.
Are the newer generation units more effective in terms of ADC and EBS. I know there is a fix for the single lever braking if I don't feel that I am adapting.
I live and ride in NE NV. I live at 5700' and routinely ride to 10,000' I do 125 mile rides often. Mostly remote 50 year old 2 tracks.
What can I expect in performance and reliability with an 18 or 19 Sportsman 850 or 1000? Does the 1000 get appreciably worse fuel economy?
Any information you could share would be appreciated!
The Yamaha is dead nuts reliable and works very well.
Are the newer generation units more effective in terms of ADC and EBS. I know there is a fix for the single lever braking if I don't feel that I am adapting.
I live and ride in NE NV. I live at 5700' and routinely ride to 10,000' I do 125 mile rides often. Mostly remote 50 year old 2 tracks.
What can I expect in performance and reliability with an 18 or 19 Sportsman 850 or 1000? Does the 1000 get appreciably worse fuel economy?
Any information you could share would be appreciated!