Category: Forum News

Quad porn! Que music......

Hey guys, i just joined the forums, and just recently adopted a 2004 polaris 330 mag, my mom traded her old snowmobile for this ATV, stating it ran fine when they went to pick it up (Plastics and the whole machine + tires are like new condition + ownership). Later when they got it home they went to use it and they said it sounded like a bag of hammers (metal on metal) the atv shifts into gears and moves, then they turned it off. With a fit of shame they just handed it over to me excepting they got ripped off. I havent owned an atv, or dirt bike at all throughout my life, ive only done carb cleanings when it comes to small engine stuff. I have a job where all i do is electrical mechanical repairs, and some hydraulic, so i think i could tackle this myself. If this needs a new engine, is it worth ordering a used one off ebay and attempting the repair myself (consider what the machine is even worth? maybe 2300$? If there is anyone on here with experience with these 330 mags, since i havent seen the machine yet myself, what would be the first few things you would check? is it full of oil ? is there metal in the oil? are there parts of the belt/transmission that could make a metal noise aswell?


Sorry for all the questions, just want to get a solid idea of what to do when i go check the machine out. Thanks in advance.

Hey guys I have a 2007 Sportsman 500 X2 I am trying to do some rear bearings on it. But on both sides the bottom bolt that holds the hub to the a arm can’t be removed ? I can spin the entire bolt with a impact but I can not actually move the bolt forward or back? I need to get it out. Am I missing something ?? Also I am was wondering if the 500 X2 came with 2 sway bars in the rear suspension ? Mine is missing one completely and the one that is there is very loose?


Sent from my iPhone using Tapatalk

Hi Guys! Been meaning to do this for awhile.. My name is Chad I bought a 2018 Sportsman XP1000 in April. Traded in a 2016 Grizzly for it. First couple rides went great but last ride it started pulling hard at idle and wouldn't shift. Took it back to the dealership to have it checked out assuming it'll be covered under warranty.

I do updates on this machine with my buddies... Dirt ObseXXion on YouTube. I'll be posting update and ride videos there..

Hi guys, so I just picked up an 09 outlander from a buddy of mine for cheap because he sunk it and locked up the top end and messed up some electrical. I'm pretty handy with mechanical work but when it comes to electrical I'm lost. I've tried multiple good batteries and jump boxes so I know I'm giving it the power it needs but when I turn the key absolutely nothing happens. No fuel pump, no dash, no lights. I took a test light to the fuse box and I'm getting power to all 3 relays. And this is the part that stumps me, when I stick the test light to the diode, the dash comes on but will go off after about 15 seconds or so as if you took the key out. But if you keep the diode grounded with the test light, the dash stays on for as long as its grounded but nothing else on the bike works. The diode tests good with an volt meter, All the fuses test good and I've swapped all 3 relays with new ones. Its seeming like any device that has to go through the ecm is not working but I'm hoping its something simple that I'm looking over as I don't wanna fork over the cash for a new ecm lol. Any help or ideas at all is appreciated

OK... I have a 500ho -2013 and it literally started filling the airbox with oil through the crankcase vent hose. 110 lbs of compression, changed oil and filter. Once started the oil in resevoir gets pumped into crankcase then doesn't get pumped back to resevoir. Checked return line and there are no blackages - HELP!!!

Hi everyone! I am looking for some insight on a snorkel.
As of online there are acouple different companies that make and sell snorkel kits, but all systems that i have seen come out off to the sides in the front storage on these newer sportsmans.
Has anyone found a centre snorkel kit that comes up infront of the middle headlight ?couldnt care about loosing the light or front storage but i like this positioning better.
i was also thinking about the highlifters snorkel system. anyone know if it would mount to just the 850sp ?or if you can even buy just that kit ?

thanks in advance

Machined Integrations- Anyone with used set for sale.?

Looking to go 27x12-14 on both front and rear wheels on my 2016 Sportsman 1000XP. Not sure how this is going to handle or steer with balloons in the front. Any guys running a similar setup that can comment?

Also are the front and rear factory wheels the same width just different offset?

Looks like I should probably do full replacement of the primary drive clutch. One of the spacers/bushings somehow came out and flew around inside the housing. Chewed, dinged, scratched and took bites out of just about everything. Somehow the driven clutch survived and looks to be OK.

Looking for the best price for a new drive clutch and any advice, what to look for when putting it back on. Best I've found for OEM is $590 for the clutch, springs and weights. Also found an aftermarket for about $175 but is out of stock. Kinda need to get this done soon. Are there any places to get used parts, or is that asking for trouble?

I've seen quite a few videos that are helpful, looks fairly simple.

Basically, use the wheeler at the deer lease, easy riding. Got it buried this past spring and really got down on it while pulling a heavy trailer, thinking that's what caused the problems.

Thanks!